MIL-HDBK-5J Materials: Design Allowables by Alloy
498 handbook tables from MIL-HDBK-5J (31 January 2003), one page each: every dimension band and basis of the table, the temperature-effect curves the handbook maps to it, and the Ramberg-Osgood curves where an exponent is on file. Open a page, then analyse the material in the MIL-HDBK-5J tool, rank alloys with the Material Finder or overlay them against temperature with the Material Comparator.
Aluminum (223) Beryllium (11) Copper Alloy (2) Heat-Resistant (43) Hybrid (8) Magnesium Alloy (32) Miscellaneous (4) Steel (124) Titanium (51)
Aluminum
2014
- T6 Clad sheet (Table 3.2.1.0(c))
- T6 Die forging (Table 3.2.1.0(e))
- T6 Hand forging (Table 3.2.1.0(f))
- T6 Sheet (Table 3.2.1.0(b))
- T6 and T651 Bar, rod, and shapes, rolled, drawn, or cold-finished (Table 3.2.1.0(d))
- T6, T6510, and T6511 Extruded bar, rod, and shapes (Table 3.2.1.0(g))
- T62 Bar, rod, and shapes, rolled, drawn, or cold-finished (Table 3.2.1.0(d))
- T62 Clad plate (Table 3.2.1.0(c))
- T62 Clad sheet (Table 3.2.1.0(c))
- T62 Extruded bar, rod, and shapes (Table 3.2.1.0(g))
- T62 Plate (Table 3.2.1.0(b))
- T62 Sheet (Table 3.2.1.0(b))
- T651 Clad plate (Table 3.2.1.0(c))
- T651 Plate (Table 3.2.1.0(b))
- T652 Die forging (Table 3.2.1.0(e))
- T652 Hand forging (Table 3.2.1.0(f))
2017
- T4, T451, T42 Bar and rod; rolled, drawn, or cold-finished (Table 3.2.2.0(b))
2024
- T3 Clad flat sheet and plate (Table 3.2.3.0(e))
- T3 Drawn tubing (Table 3.2.3.0(g))
- T3 Sheet (Table 3.2.3.0(b))
- T3, T3510, and T3511 Extruded bar, rod, and shapes (Table 3.2.3.0(j))
- T351 Bar and rod; rolled, drawn, or cold-finished (Table 3.2.3.0(i))
- T351 Clad flat sheet and plate (Table 3.2.3.0(e))
- T351 Plate (Table 3.2.3.0(b))
- T361 Bar and rod; rolled, drawn, or cold-finished (Table 3.2.3.0(i))
- T361 Clad flat sheet and plate (Table 3.2.3.0(e))
- T361 Plate (Table 3.2.3.0(b))
- T361 Sheet (Table 3.2.3.0(b))
- T4 Bar and rod; rolled, drawn, or cold-finished (Table 3.2.3.0(i))
- T4 Clad coiled sheet (Table 3.2.3.0(e))
- T4 Coiled Sheet (Table 3.2.3.0(b))
- T42 Bar and rod; rolled, drawn, or cold-finished (Table 3.2.3.0(i))
- T42 Clad flat sheet and plate (Table 3.2.3.0(e))
- T42 Drawn tubing (Table 3.2.3.0(g))
- T42 Extruded bar, rod, and shapes (Table 3.2.3.0(j))
- T42 Flat Sheet and Plate (Table 3.2.3.0(b))
- T6 Bar and rod; rolled, drawn, or cold finished (Table 3.2.3.0(i))
- T62 Bar and rod; rolled, drawn, or cold finished (Table 3.2.3.0(i))
- T62 Clad flat sheet and plate (Table 3.2.3.0(e))
- T62 Flat Sheet and Plate (Table 3.2.3.0(b))
- T72 Clad flat sheet and plate (Table 3.2.3.0(e))
- T72 Flat Sheet and Plate (Table 3.2.3.0(b))
- T81 Clad flat sheet and plate (Table 3.2.3.0(e))
- T81 Drawn tubing (Table 3.2.3.0(g))
- T81 Sheet (Table 3.2.3.0(b))
- T81, T8510, and T8511 Extruded bar, rod, and shapes (Table 3.2.3.0(j))
- T851 Bar and rod; rolled, drawn, or cold finished (Table 3.2.3.0(i))
- T851 Clad flat sheet and plate (Table 3.2.3.0(e))
- T851 Plate (Table 3.2.3.0(b))
- T861 Clad flat sheet and plate (Table 3.2.3.0(e))
- T861 Plate (Table 3.2.3.0(b))
- T861 Sheet (Table 3.2.3.0(b))
2025
- T6 Die forging (Table 3.2.4.0(b))
2026
- T3511 Extrusions (Table 3.2.5.0(b))
2090
- T83 Sheet (Table 3.2.6.0(b))
2124
- T851 Plate (Table 3.2.7.0(b))
2219
- T62 Sheet and plate (Table 3.2.8.0(b))
- T81 Sheet and plate (Table 3.2.8.0(b))
- T851 Sheet and plate (Table 3.2.8.0(b))
- T8511 Extruded shapes (Table 3.2.8.0(d))
- T852 Hand Forging (Table 3.2.8.0(c))
- T87 Plate (Table 3.2.8.0(b))
- T87 Sheet (Table 3.2.8.0(b))
2297
- T87 Plate (Table 3.2.9.0(b))
2424
- T3 Clad sheet (Table 3.2.10.0(b))
- T3 Sheet (Table 3.2.10.0(b))
2519
- T87 Plate (Table 3.2.11.0(b))
2524
- T3 Clad sheet and Plate (Table 3.2.12.0(b))
2618
- T61 Die forging (Table 3.2.13.0(b))
- T61 Hand forging (Table 3.2.13.0(c))
354.0
- T6 (class 1, designated area) Casting (Table 3.9.1.0(b))
- T6 (class 10, nondesignated area) Casting (Table 3.9.1.0(b))
- T6 (class 11, nondesignated area) Casting (Table 3.9.1.0(b))
- T6 (class 2, designated area) Casting (Table 3.9.1.0(b))
355.0
- T6 Permanent mold casting (Table 3.9.2.0(b))
356.0
- T6 Investment casting (Table 3.9.4.0(b))
- T6 Permanent mold / casting (Table 3.9.4.0(b))
- T6 Sand casting (Table 3.9.4.0(b))
359.0
- T6 (class 1, designated area) Casting (Table 3.9.8.0(b))
- T6 (class 10, nondesignated area) Casting (Table 3.9.8.0(b))
- T6 (class 11, nondesignated area) Casting (Table 3.9.8.0(b))
- T6 (class 2, designated area) Casting (Table 3.9.8.0(b))
5052
- H32 Sheet and plate (Table 3.5.1.0(b))
- H34 Sheet and plate (Table 3.5.1.0(b))
- H36 Sheet (Table 3.5.1.0(b))
- H38 Sheet (Table 3.5.1.0(b))
- O Sheet and plate (Table 3.5.1.0(b))
5083
- H111 Extrusion (Table 3.5.2.0(c))
- H112 Extrusion (Table 3.5.2.0(c))
- H112 Sheet and plate (Table 3.5.2.0(b))
- H321 Sheet and plate (Table 3.5.2.0(b))
- H323 Sheet and plate (Table 3.5.2.0(b))
- H343 Sheet and plate (Table 3.5.2.0(b))
- O Extrusion (Table 3.5.2.0(c))
- O Sheet and plate (Table 3.5.2.0(b))
5086
- H111 Extrusion (Table 3.5.3.0(b))
- H112 Extrusion (Table 3.5.3.0(b))
- H112 Sheet and plate (Table 3.5.3.0(b))
- H32 Sheet and plate (Table 3.5.3.0(b))
- H34 Sheet and plate (Table 3.5.3.0(b))
- H36 Sheet and plate (Table 3.5.3.0(b))
- H38 Sheet and plate (Table 3.5.3.0(b))
- O Extrusion (Table 3.5.3.0(b))
- O Sheet and plate (Table 3.5.3.0(b))
5454
- H111 Extrusion (Table 3.5.4.0(b))
- H112 Extrusion (Table 3.5.4.0(b))
- H112 Sheet and plate (Table 3.5.4.0(b))
- H32 Sheet and plate (Table 3.5.4.0(b))
- H34 Sheet and plate (Table 3.5.4.0(b))
- O Extrusion (Table 3.5.4.0(b))
- O Sheet and plate (Table 3.5.4.0(b))
5456
- H111 Extruded bar, rod, and shapes (Table 3.5.5.0(c))
- H112 Extruded bar, rod, and shapes (Table 3.5.5.0(c))
- H112 Sheet and plate (Table 3.5.5.0(b))
- H321 Sheet and plate (Table 3.5.5.0(b))
- O Extruded bar, rod, and shapes (Table 3.5.5.0(c))
- O Sheet and plate (Table 3.5.5.0(b))
6013
- T6 Sheet (Table 3.6.1.0(b))
6061
- T4 Drawn tube (Table 3.6.2.0(c))
- T4 Rolled, drawn, or cold-finished rod and special shapes (Table 3.6.2.0(d))
- T4 Sheet (Table 3.6.2.0(b))
- T4, T4510, / and T4511 Extruded rod, bar, and shapes (Table 3.6.2.0(g))
- T42 Drawn tube (Table 3.6.2.0(c))
- T42 Extruded rod, bar, and shapes (Table 3.6.2.0(g))
- T42 Plate (Table 3.6.2.0(b))
- T42 Rolled, drawn, or cold-finished rod and special shapes (Table 3.6.2.0(d))
- T42 Sheet (Table 3.6.2.0(b))
- T451 Plate (Table 3.6.2.0(b))
- T451 Rolled, drawn, or cold-finished rod and special shapes (Table 3.6.2.0(d))
- T6 Rolled, drawn, or cold-finished rod and special shapes (Table 3.6.2.0(d))
- T6 and T62 Sheet (Table 3.6.2.0(b))
- T6 and T652 Die forging (Table 3.6.2.0(e))
- T6, T6510, and T6511 Extruded rod, bar, and shapes (Table 3.6.2.0(g))
- T62 Extruded rod, bar, and shapes (Table 3.6.2.0(g))
- T62 Rolled, drawn, or cold-finished rod and special shapes (Table 3.6.2.0(d))
- T651 Rolled, drawn, or cold-finished rod and special shapes (Table 3.6.2.0(d))
- T651 and T62 Plate (Table 3.6.2.0(b))
- T6a and T652 Hand forging (Table 3.6.2.0(f))
- T6b and T62 Drawn tube (Table 3.6.2.0(c))
6151
- T6 Die forging (Table 3.6.3.0(b))
7010
- T7451 Plate (Table 3.7.1.0(b))
7040
- T7451 Plate (Table 3.7.2.0(b))
7049
- T7351 Plate (Table 3.7.3.0(b))
7049/7149
- T73 Die forging (Table 3.7.3.0(c))
- T73 Hand forging (Table 3.7.3.0(d))
- T73511 Extrusion (Table 3.7.3.0(e))
7050
- T73511 Extrusion (Table 3.7.4.0(e))
- T74 Die forging (Table 3.7.4.0(c))
- T7451 Plate (Table 3.7.4.0(b))
- T74511 Extrusion (Table 3.7.4.0(e))
- T7452 Die forgings (Table 3.7.4.0(c))
- T7452 Hand Forging (Table 3.7.4.0(d))
- T7651 Plate (Table 3.7.4.0(b))
- T76511 Extrusion (Table 3.7.4.0(e))
7055
- T74511 Extrusion (Table 3.7.5.0(b))
- T76511 Extrusion (Table 3.7.5.0(c))
- T7751 Plate (Table 3.7.5.0(d))
- T77511 Extrusion (Table 3.7.5.0(e))
7075
- T6 Clad sheet (Table 3.7.6.0(c))
- T6 Die forging (Table 3.7.6.0(e))
- T6 Hand forging (Table 3.7.6.0(f))
- T6 and T62 Clad sheet (Table 3.7.6.0(c))
- T6 and T62 Sheet (Table 3.7.6.0(b))
- T6, T651, and T62 Bar, rod, and shapes: rolled, drawn, or cold-finished (Table 3.7.6.0(d))
- T6, T6510, T6511, and T62 Extrusion (rod, bar, and shapes) (Table 3.7.6.0(g))
- T62 Clad plate (Table 3.7.6.0(c))
- T62 Plate (Table 3.7.6.0(b))
- T651 Clad plate (Table 3.7.6.0(c))
- T651 Plate (Table 3.7.6.0(b))
- T652 Die forging (Table 3.7.6.0(e))
- T652 Hand forging (Table 3.7.6.0(f))
- T73 Hand forging (Table 3.7.6.0(f))
- T73 Sheet (Table 3.7.6.0(b))
- T7351 Plate (Table 3.7.6.0(b))
- T7352 Die forging (Table 3.7.6.0(e))
- T7352 Hand forging (Table 3.7.6.0(f))
- T73a, T73510, T73511 Extrusion (rod, bars, and shapes) (Table 3.7.6.0(g))
- T73a,b Die forging (Table 3.7.6.0(e))
- T73b or T7351 Bar, rod, and shapes: rolled, drawn, or cold-finished (Table 3.7.6.0(d))
- T76 Clad sheet (Table 3.7.6.0(c))
- T76 Sheet and plate (Table 3.7.6.0(b))
- T76, T76510, T76511 Extrusion (rod, bar, and shapes) (Table 3.7.6.0(g))
- T7651 Clad plate (Table 3.7.6.0(c))
- T7651 Sheet and plate (Table 3.7.6.0(b))
7150
- T6151 Plate (Table 3.7.7.0(b))
- T61511 Extrusion (Table 3.7.7.0(c))
- T7751 Plate (Table 3.7.7.0(b))
- T77511 Extrusion (Table 3.7.7.0(c))
7175
- T66 Die forging (Table 3.7.8.0(b))
- T73511 Extrusion (Table 3.7.8.0(d))
- T74 Hand forging (Table 3.7.8.0(c))
- T7452 Hand forging (Table 3.7.8.0(c))
- T74a,b Die forging (Table 3.7.8.0(b))
7249
- T7452 Hand forging (Table 3.7.9.0(b))
7475
- T61 Clad sheet (Table 3.7.10.0(d))
- T61 Sheet (Table 3.7.10.0(b))
- T651 Plate (Table 3.7.10.0(b))
- T7351 Plate (Table 3.7.10.0(c))
- T761 Clad sheet (Table 3.7.10.0(d))
- T761 Sheet (Table 3.7.10.0(b))
- T7651 Plate (Table 3.7.10.0(b))
A201.0
- T7 (class 1, designated area) Casting (Table 3.8.1.0(b))
- T7 (class 10, nondesignated area) Casting (Table 3.8.1.0(b))
- T7 (class 11, nondesignated area) Casting (Table 3.8.1.0(b))
- T7 (class 2, designated area) Casting (Table 3.8.1.0(b))
A356.0
- T6 (class 1, designated area) Casting (Table 3.9.5.0(b))
- T6 (class 10, nondesignated area) Casting (Table 3.9.5.0(b))
- T6 (class 11, nondesignated area) Casting (Table 3.9.5.0(b))
- T6 (class 12, nondesignated area) Casting (Table 3.9.5.0(b))
- T6 (class 2, designated area) Casting (Table 3.9.5.0(b))
- T6 (class 3, designated area) Casting (Table 3.9.5.0(b))
A357.0
- T6 (class 1, designated area) Casting (Table 3.9.6.0(b))
- T6 (class 10, nondesignated area) Casting (Table 3.9.6.0(b))
- T6 (class 11, nondesignated area) Casting (Table 3.9.6.0(b))
- T6 (class 12, nondesignated area) Casting (Table 3.9.6.0(b))
- T6 (class 2, designated area) Casting (Table 3.9.6.0(b))
C355.0
- T6 (class 1) Casting (Table 3.9.3.0(b))
- T6 (class 10) Casting (Table 3.9.3.0(b))
- T6 (class 11) Casting (Table 3.9.3.0(b))
- T6 (class 12) Casting (Table 3.9.3.0(b))
- T6 (class 2) Casting (Table 3.9.3.0(b))
- T6 (class 3) Casting (Table 3.9.3.0(b))
D357.0
- T6 Casting (Table 3.9.7.0(b))
Beryllium
Beryllium
- Hot pressed (ground and etched) Bar, rod, tubing, and machined shapes (Table 7.2.1.0(b))
- Stress relieved (ground and etched) Plate (Table 7.2.1.0(c))
- Stress relieved (ground and etched) Sheet (Table 7.2.1.0(c))
C17200 Copper Beryllium
- TF00 Rod and bar (Table 7.3.2.0(d))
- TH04 Rod and bar (Table 7.3.2.0(e))
- TH04 Rod and bar (Table 7.3.4.0(f))
C17200 Copper Beryllium Mechanical
- TF00 Mechanical tubing (Table 7.3.2.0(g))
Copper Beryllium
- TF00 Strip (Table 7.3.2.0(c))
- TH01 Strip (Table 7.3.2.0(c))
- TH02 Strip (Table 7.3.2.0(c))
- TH04 Strip (Table 7.3.2.0(c))
Copper Alloy
C86300 Manganese Bronze
- As cast Sand and centrifugal casting (Table 7.3.1.0(d))
C86500 Manganese Bronze
- As cast Sand and centrifugal casting (Table 7.3.1.0(c))
Heat-Resistant
A-286
- Solution treated and aged Bar (Table 6.2.1.0(b))
- Solution treated and aged Sheet, strip, / and plate (Table 6.2.1.0(b))
Hastelloy X
- Solution treated (annealed) Sheet and plate (Table 6.3.1.0(b))
HAYNES 230
- 2200 Anneal Plate (Table 6.3.9.0(b))
- 2250 Anneal Sheet (Table 6.3.9.0(b))
HAYNES HR-120
- Annealed Sheet, Strip, and Plate (Table 6.3.10.0(b))
HAYNES230
- 2250 Anneal Bar (Table 6.3.9.0(c))
HS 188
- Solution Treated Sheet (Table 6.4.2.0(b))
Inconel 600
- Annealed Bar and rod (Table 6.3.2.0(d))
- Annealed Forging (Table 6.3.2.0(b))
- Annealed Sheet, strip, and plate (Table 6.3.2.0(b))
- Cold drawn Tubing (Table 6.3.2.0(b))
- Cold-worked Round (Table 6.3.2.0(c))
- Cold-worked Square, hexagon, and rectangle (Table 6.3.2.0(c))
- Hot-worked Round (Table 6.3.2.0(d))
- Hot-worked Square, / hexagon, and / rectangle (Table 6.3.2.0(d))
Inconel 625
- Annealed Bar (Table 6.3.3.0(c))
- Annealed Sheet and plate (Table 6.3.3.0(b))
Inconel 706
- Heat treated per indicated specification Bar and forging (Table 6.3.4.0(b))
- Heat treated per indicated specification Sheet, strip, and plate (Table 6.3.4.0(b))
Inconel 718
- Solution treated and aged per indicated specificat Bar (Table 6.3.5.0(c))
- Solution treated and aged per indicated specificat Forging (Table 6.3.5.0(c))
- Solution treated and aged per indicated specificat Plate (Table 6.3.5.0(b))
- Solution treated and aged per indicated specificat Sheet (Table 6.3.5.0(b))
- Solution treated and aged per indicated specificat Sheet and plate (Table 6.3.5.0(b))
- Solution treated and aged per indicated specificat Tubing (Table 6.3.5.0(b))
Inconel 718 Investment
- ST Investment Casting (Table 6.3.5.0(d))
Inconel X-750
- Annealed and aged Plate (Table 6.3.6.0(b))
- Annealed and aged Sheet (Table 6.3.6.0(b))
- Annealed and aged Strip (Table 6.3.6.0(b))
- Equalized and aged Bars and forgings (Table 6.3.6.0(b))
L-605
- Solution treated Bar and forging (Table 6.4.1.0(b))
- Solution treated Plate (Table 6.4.1.0(b))
- Solution treated Sheet (Table 6.4.1.0(b))
N-155
- Solution treated Sheet (Table 6.2.2.0(b))
- Solution treated Strip and plate (Table 6.2.2.0(b))
- Solution treated Tubing (Table 6.2.2.0(b))
Ren� 41
- Solution treated and aged (1400 F) Bar and forging (Table 6.3.7.0(b))
- Solution treated and aged (1400 F) Plate (Table 6.3.7.0(b))
- Solution treated and aged (1400 F) Sheet (Table 6.3.7.0(b))
Waspaloy
- Solution, stabilization, and precipitation heat tr Bar, forging, and / ring (Table 6.3.8.0(b))
- Solution, stabilization, and precipitation heat tr Forging (Table 6.3.8.0(b))
- Solution, stabilization, and precipitation heat tr Sheet, strip, and plate (Table 6.3.8.0(b))
Hybrid
2024
- lay-up 2/1 Aramid fiber reinforced sheet laminate (Table 7.5.1.0(b))
- lay-up 3/2 Aramid fiber reinforced sheet laminate (Table 7.5.1.0(b))
- lay-up 4/3 Aramid fiber reinforced sheet laminate (Table 7.5.1.0(b))
- lay-up 5/4 Aramid fiber reinforced sheet laminate (Table 7.5.1.0(b))
7475
- lay-up 2/1 Aramid fiber reinforced sheet laminate (Table 7.5.2.0(b))
- lay-up 3/2 Aramid fiber reinforced sheet laminate (Table 7.5.2.0(b))
- lay-up 4/3 Aramid fiber reinforced sheet laminate (Table 7.5.2.0(b))
- lay-up 5/4 Aramid fiber reinforced sheet laminate (Table 7.5.2.0(b))
Magnesium Alloy
AM100A
- T6 Investment casting (Table 4.3.1.0(b))
- T6 Permanent mold casting (Table 4.3.1.0(b))
AZ31B
- F Extruded / hollow shapes (Table 4.2.1.0(d))
- F Extruded bar, rod, and / solid shapes (Table 4.2.1.0(d))
- F Extruded tube (Table 4.2.1.0(d))
- F Forging (Table 4.2.1.0(d))
- H24 Plate (Table 4.2.1.0(b))
- H24 Sheet (Table 4.2.1.0(b))
- H26 Plate (Table 4.2.1.0(c))
- O Plate (Table 4.2.1.0(b))
- O Sheet (Table 4.2.1.0(b))
AZ61A
- F Extruded / hollow / shapes (Table 4.2.2.0(b))
- F Extruded / tube (Table 4.2.2.0(b))
- F Extruded bar, rod, and solid / shapes (Table 4.2.2.0(b))
- F Forging (Table 4.2.2.0(b))
AZ91C
- T6 Investment casting (Table 4.3.2.0(b))
- T6 Sand casting (Table 4.3.2.0(b))
AZ91E
- T6 Sand casting (Table 4.3.2.0(c))
AZ92A
- T6 Investment Casting (Table 4.3.3.0(b))
- T6 Permanent mold / casting (Table 4.3.3.0(b))
- T6 Sand casting (Table 4.3.3.0(b))
EZ33A
- T5 Sand casting (Table 4.3.4.0(b))
QE22A
- T6 Sand casting (Table 4.3.5.0(b))
ZE41A
- T5 Sand casting (Table 4.3.6.0(b))
ZK60A
- F Extruded / hollow shapes (Table 4.2.3.0(b))
- F Extruded / tube (Table 4.2.3.0(b))
- F Extruded rod, bar, and solid shapes (Table 4.2.3.0(b))
- T5 Die / forging (Table 4.2.3.0(c))
- T5 Extruded / hollow / shapes (Table 4.2.3.0(c))
- T5 Extruded rod, bar, and solid shapes (Table 4.2.3.0(c))
- T5 Extruded tube (Table 4.2.3.0(c))
- T5 Hand / forging (Table 4.2.3.0(c))
Miscellaneous
MP159
- Solution treated, cold drawn, and aged Bar (Table 7.4.2.0(b))
- Solution treated, cold drawn, and aged Bar (Table 7.4.2.0(c))
MP35N
- Solution treated and cold drawn Bar (Table 7.4.1.0(c))
- Solution treated, cold drawn, and aged Bar (Table 7.4.1.0(b))
Steel
15-5PH
- H1025 Bar (Table 2.6.7.0(b))
- H1025 Plate (Table 2.6.7.0(c))
- H1075 Bar (Table 2.6.7.0(b))
- H1100 Bar (Table 2.6.7.0(b))
- H1150 Bar (Table 2.6.7.0(b))
- H900 Bar (Table 2.6.7.0(b))
- H925 Bar (Table 2.6.7.0(b))
- H935 Investment casting (Table 2.6.7.0(d))
17-4PH
- Investment Casting (Table 2.6.9.0(f))
- H1000 Investment Casting (Table 2.6.9.0(f))
- H1025 Bar (Table 2.6.9.0(e))
- H1025 Forging, tubing, and rings (Table 2.6.9.0(d))
- H1025 Sheet, strip, and plate (Table 2.6.9.0(b))
- H1075 Bar (Table 2.6.9.0(e))
- H1075 Forging, tubing, and rings (Table 2.6.9.0(d))
- H1075 Sheet, strip, and plate (Table 2.6.9.0(b))
- H1100 Bar (Table 2.6.9.0(e))
- H1100 Forging, tubing, and rings (Table 2.6.9.0(d))
- H1100 Investment Casting (Table 2.6.9.0(f))
- H1100 Sheet, strip, and plate (Table 2.6.9.0(b))
- H1150 Bar (Table 2.6.9.0(e))
- H1150 Forging, tubing, and rings (Table 2.6.9.0(d))
- H1150 Sheet, strip, and plate (Table 2.6.9.0(b))
- H1150Ma Bar (Table 2.6.9.0(e))
- H1150Ma Forging, tubing, and rings (Table 2.6.9.0(d))
- H900 Bar (Table 2.6.9.0(e))
- H900 Forging, tubing, and rings (Table 2.6.9.0(d))
- H900 Sheet, strip, and plate (Table 2.6.9.0(b))
- H925 Bar (Table 2.6.9.0(e))
- H925 Forging, tubing, and rings (Table 2.6.9.0(d))
- H925 Sheet, strip, and plate (Table 2.6.9.0(b))
17-7PH
- TH1050 Plate (Table 2.6.10.0(b))
- TH1050 Sheet (Table 2.6.10.0(b))
250 Maraging
- Maraged at 900 F Bar (Table 2.5.1.0(b))
- Maraged at 900 F Plate (Table 2.5.1.0(b))
- Maraged at 900 F Sheet (Table 2.5.1.0(b))
280 Maraging
- Maraged at 900 F Bar (Table 2.5.1.0(c))
- Maraged at 900 F Plate (Table 2.5.1.0(c))
- Maraged at 900 F Sheet (Table 2.5.1.0(c))
300M (0.40C)
- Quenched and tempered Bar, forging, tubing (Table 2.3.1.0(f))
300M (0.42C)
- Quenched and tempered Bar, forging, tubing (Table 2.3.1.0(f))
4330V
- Quenched and tempered All wrought forms (Table 2.3.1.0(g))
- Quenched and tempered Bar, forging, tubing (Table 2.3.1.0(f))
4335V
- Quenched and tempered Bar, forging, tubing (Table 2.3.1.0(f))
- Quenched and tempered Sheet, strip, and plate (Table 2.3.1.0(f))
5Cr-Mo-V Aircraft
- Quenched and tempered (240 ksi) Bars and forgings (Table 2.4.1.0(c))
- Quenched and tempered (240 ksi) Sheet, strip, and plate (Table 2.4.1.0(d))
- Quenched and tempered (260 ksi) Bars and forgings (Table 2.4.1.0(c))
- Quenched and tempered (260 ksi) Sheet, strip, and plate (Table 2.4.1.0(d))
- Quenched and tempered (280 ksi) Bars and forgings (Table 2.4.1.0(c))
- Quenched and tempered (280 ksi) Sheet, strip, and plate (Table 2.4.1.0(d))
9Ni-4Co-0.20C
- Quenched and tempered Plate (Table 2.4.2.0(b))
9Ni-4Co-0.30C
- Quenched and tempered Bar, forging, and tubing (Table 2.4.3.0(b))
- Quenched and tempered Sheet, strip, and plate (Table 2.4.3.0(b))
AerMet 100
- Solution treated and aged Bar and forging (Table 2.5.3.0(b))
AF1410
- Bar (Table 2.5.2.0(b))
AISI 1025
- All Bar (Table 2.2.1.0(b))
- Annealed Sheet, strip, and plate (Table 2.2.1.0(b))
- Normalized Tubing (Table 2.2.1.0(b))
AISI 301and Relateda,b,c
- � Hard Sheet and strip (Table 2.7.1.0(b))
- � Hard Sheet and strip (Table 2.7.1.0(b))
- � Hard Sheet and strip (Table 2.7.1.0(b))
- Annealed Sheet and strip (Table 2.7.1.0(b))
- Full Hard Sheet and strip (Table 2.7.1.0(b))
AISI 4130
- Normalized and tempered, stress relieved Sheet, strip, plate, / and tubing (Table 2.3.1.0(c))
- Normalized and tempered, stress relieved Sheet, strip, plate, / bars, and forgings (Table 2.3.1.0(g))
- Quenched and tempered Tubing (Table 2.3.1.0(c))
AISI 4135
- Normalized and tempered, stress relieved Sheet, strip, plate, / and tubing (Table 2.3.1.0(g))
- Normalized and tempered, stress relieved (100 ksi) Tubing (Table 2.3.1.0(c))
- Normalized and tempered, stress relieved (95 ksi) Tubing (Table 2.3.1.0(c))
- Quenched and tempered Tubing (Table 2.3.1.0(c))
- Quenched and tempered (125 ksi) Tubing (Table 2.3.1.0(c))
- Quenched and tempered (150 ksi) Tubing (Table 2.3.1.0(c))
- Quenched and tempered (180 ksi) Tubing (Table 2.3.1.0(c))
AISI 4340
- Quenched and tempered Bar, forging, tubing (Table 2.3.1.0(f))
AISI 8630
- Normalized and tempered, stress relieved Tubing (Table 2.3.1.0(g))
- Normalized and tempered, stress relieved (90 ksi) Sheet, strip, and plate (Table 2.3.1.0(c))
- Normalized and tempered, stress relieved (95 ksi) Sheet, strip, and plate (Table 2.3.1.0(c))
- Quenched and tempered Bars and forgings (Table 2.3.1.0(c))
AISI 8735
- Normalized and tempered, stress relieved Sheet, strip, and / plate (Table 2.3.1.0(g))
AISI 8740
- Quenched and tempered Bars and forgings (Table 2.3.1.0(c))
AM-355
- SCT 1000 Plate (Table 2.6.2.0(d))
- SCT1000 Bar and forging (Table 2.6.2.0(c))
- SCT1000 Sheet and strip (Table 2.6.2.0(c))
- SCT850 Bar and forging (Table 2.6.2.0(c))
- SCT850 Plate (Table 2.6.2.0(d))
- SCT850 Sheet and strip (Table 2.6.2.0(c))
applicable strength levels
- Quenched and tempered (125 ksi) All wrought forms (Table 2.3.1.0(g))
- Quenched and tempered (140 ksi) All wrought forms (Table 2.3.1.0(g))
- Quenched and tempered (150 ksi) All wrought forms (Table 2.3.1.0(g))
- Quenched and tempered (160 ksi) All wrought forms (Table 2.3.1.0(g))
- Quenched and tempered (180 ksi) All wrought forms (Table 2.3.1.0(g))
- Quenched and tempered (200 ksi) All wrought forms (Table 2.3.1.0(g))
Custom 450
- H1000 Bar (Table 2.6.3.0(c))
- H1050 Bar (Table 2.6.3.0(b))
- H1050 Bar (Table 2.6.3.0(c))
- H1100 Bar (Table 2.6.3.0(c))
- H1150 Bar (Table 2.6.3.0(c))
- H900 Bar (Table 2.6.3.0(b))
- H900 Bar (Table 2.6.3.0(c))
- H950 Bar (Table 2.6.3.0(c))
- Solution Treated Bar (Table 2.6.3.0(b))
- Solution treated Bar (Table 2.6.3.0(c))
Custom 455
- H1000 Bar (Table 2.6.4.0(b))
- H950 Bar (Table 2.6.4.0(b))
- H950 Tubing (Welded) (Table 2.6.4.0(b))
Custom 465
D6AC
- Quenched and tempered Bar, forging, tubing (Table 2.3.1.0(f))
- Quenched and tempered Sheet, strip, and plate (Table 2.3.1.0(f))
Hy-Tuf
- Quenched and tempered Bar, forging, tubing (Table 2.3.1.0(f))
PH13-8Mo
- H1000 Forging, flash welded ring, and extrusion (Table 2.6.6.0(c))
- H1000 Round, hex, square and flat bar (Table 2.6.6.0(b))
- H1025 Forging, flash welded ring, and extrusion (Table 2.6.6.0(c))
- H1025 Round, hex, square and flat bar (Table 2.6.6.0(b))
- H1050 Forging, flash welded ring, and extrusion (Table 2.6.6.0(c))
- H1050 Round, hex, square and flat bar (Table 2.6.6.0(b))
- H1100 Forging, flash welded ring, and extrusion (Table 2.6.6.0(c))
- H1100 Round, hex, square and flat bar (Table 2.6.6.0(b))
- H1150 Forging, flash welded ring, and extrusion (Table 2.6.6.0(c))
- H1150 Round, hex, square and flat bar (Table 2.6.6.0(b))
- H950 Forging, flash welded ring, and extrusion (Table 2.6.6.0(c))
- H950 Round, hex, square and flat bar (Table 2.6.6.0(b))
PH15-7Mo
- TH1050 Sheet, strip, and plate (Table 2.6.8.0(b))
Titanium
Commercially Pure
- Annealed Extruded bars and shapes (Table 5.2.1.0(c))
- Annealed (50 ksi) Extruded bars and shapes (Table 5.2.1.0(c))
- Annealed (65 ksi) Extruded bars and shapes (Table 5.2.1.0(c))
Commercially Pure CP-1
- Annealed Sheet, strip, and plate (Table 5.2.1.0(b))
Commercially Pure CP-2
- Annealed Sheet, strip, and plate (Table 5.2.1.0(b))
Commercially Pure CP-3
- Annealed Sheet, strip, and plate (Table 5.2.1.0(b))
Commercially Pure CP-4
- Annealed Sheet, strip, and plate (Table 5.2.1.0(b))
Commercially Pure CP-70
- Annealed Bar (Table 5.2.1.0(b))
Ti-10V-2Fe-3Al
- Solution treated and aged (900-950 F) Conventional die forging (Table 5.5.3.0(b))
- Solution treated and aged (950-1000 F) Hand forging (Table 5.5.3.0(c))
Ti-13V-11Cr-3Al
- Annealed Bar (Table 5.5.1.0(b))
- Annealed Sheet, strip, and plate (Table 5.5.1.0(b))
- Solution treated / and aged Bar (Table 5.5.1.0(b))
- Solution treated / and aged Sheet, strip, and plate (Table 5.5.1.0(b))
Ti-15V-3Cr-3Sn-3Al
- STA (1000 F/8 Hrs.) Sheet (Table 5.5.2.0(b))
Ti-4.5Al-3V-2Fe-2Mo
- Annealed Bar (Table 5.4.3.0(c))
- Annealed Sheet (Table 5.4.3.0(b))
Ti-5Al-2.5Sn
- Annealed Bar (Table 5.3.1.0(c))
- Annealed Extruded bars and shapes (Table 5.3.1.0(d))
- Annealed Forging (Table 5.3.1.0(c))
- Annealed Plate (Table 5.3.1.0(b))
- Annealed Sheet (Table 5.3.1.0(b))
- Annealed Strip (Table 5.3.1.0(b))
Ti-6Al-2Sn-4Zr-2Mo
- Duplex annealed Sheet (Table 5.3.3.0(b))
- STA (Duplex annealed) Bar (Table 5.3.3.0(c))
- STA (Duplex annealed) Forging (Table 5.3.3.0(c))
- Triplex annealed Sheet (Table 5.3.3.0(b))
Ti-6Al-4V
- Alpha-beta or beta processed, / annealed Die forging (Table 5.4.1.0(f))
- Alpha-beta processed, annealed Die forging (Table 5.4.1.0(f))
- Annealed Bar (Table 5.4.1.0(c))
- Annealed Extrusion (Table 5.4.1.0(e))
- Annealed HIP Casting (Table 5.4.1.0(g))
- Annealed Plate (Table 5.4.1.0(b))
- Annealed Sheet (Table 5.4.1.0(b))
- Solution treated and aged Extrusion (Table 5.4.1.0(e))
- Solution treated and aged Rectangular bar (Table 5.4.1.0(d))
- Solution treated and aged Round, square, and hexagon bar (Table 5.4.1.0(d))
- Solution treated and aged Sheet, strip, and plate (Table 5.4.1.0(b))
Ti-6Al-6V-2Sn
- Air-cool annealed Bar (Table 5.4.2.0(c))
- Annealed Extruded bar and shapes (Table 5.4.2.0(e))
- Annealed Forging (Table 5.4.2.0(d))
- Annealed Sheet, strip, and plate (Table 5.4.2.0(b))
- Solution treated and aged Bar and forging (Table 5.4.2.0(c))
- Solution treated and aged Extruded bar and shapes (Table 5.4.2.0(e))
- Solution treated and aged Sheet, strip, and plate (Table 5.4.2.0(b))
Ti-8Al-1Mo-1V
- Duplex annealed Bar (Table 5.3.2.0(c))
- Duplex Annealed Plate (Table 5.3.2.0(b))
- Duplex Annealed Sheet (Table 5.3.2.0(b))
- Single Annealed Plate (Table 5.3.2.0(b))
- Single Annealed Sheet (Table 5.3.2.0(b))
- Solution treated and stabilized Forging (Table 5.3.2.0(c))