AZ31B-H26 Plate: MIL-HDBK-5J Design Allowables

show SI units (MPa, GPa, kg/m³) open the MIL-HDBK-5J tool compare against temperature find alternatives

Design Mechanical and Physical Properties (room temperature)

As printed in the handbook table. Bases: A and B are statistical minimums (99 % and 90 % probability at 95 % confidence), S the specification minimum. Grain directions: L longitudinal, LT long transverse, ST short transverse.

Effect of Temperature

The handbook maps no temperature-effect figure to this table.

Other AZ31B Tables

• AZ31B-F Extruded / hollow shapes (Table 4.2.1.0(d))
• AZ31B-F Extruded bar, rod, and / solid shapes (Table 4.2.1.0(d))
• AZ31B-F Extruded tube (Table 4.2.1.0(d))
• AZ31B-F Forging (Table 4.2.1.0(d))
• AZ31B-H24 Plate (Table 4.2.1.0(b))
• AZ31B-H24 Sheet (Table 4.2.1.0(b))
• AZ31B-O Plate (Table 4.2.1.0(b))
• AZ31B-O Sheet (Table 4.2.1.0(b))

Source and Use

U.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, 31 January 2003 (public domain). The values are the handbook's design allowables as extracted from the chapter tables; check the printed table before use in a certified analysis, and note that MIL-HDBK-5J was superseded by MMPDS, whose later editions may differ. No warranty is given.