AZ31B-F Extruded / hollow shapes: MIL-HDBK-5J Design Allowables
show SI units (MPa, GPa, kg/m³) open the MIL-HDBK-5J tool compare against temperature find alternatives
| Material class | Magnesium Alloy |
| Alloy / temper / form | AZ31B / F / Extruded / hollow shapes |
| Specifications | ASTM B 107 |
| Handbook | MIL-HDBK-5J, 31 January 2003, section 4.2.1.0, Table 4.2.1.0(d) (pdf page 9 of the chapter file) |
| Dimension bands | 1 |
| Density | 0.0639 lb/in3 |
Design Mechanical and Physical Properties (room temperature)
As printed in the handbook table. Bases: A and B are statistical minimums (99 % and 90 % probability at 95 % confidence), S the specification minimum. Grain directions: L longitudinal, LT long transverse, ST short transverse.
| Dimension band | all | |
|---|---|---|
| Specification | ASTM B 107 | |
| Basis | S | |
| Ftu, ksi | L | 32 |
| Fty, ksi | L | 16 |
| Fcy, ksi | L | 10 |
| e, % | L | 8 |
| E, Msi | 6.5 | |
| Ec, Msi | 6.5 | |
| G, Msi | 2.4 | |
| ν | 0.35 | |
| ρ, lb/in3 | 0.0639 | |
Effect of Temperature
The handbook maps no temperature-effect figure to this table.
Other AZ31B Tables
- AZ31B-F Extruded bar, rod, and / solid shapes (Table 4.2.1.0(d))
- AZ31B-F Extruded tube (Table 4.2.1.0(d))
- AZ31B-F Forging (Table 4.2.1.0(d))
- AZ31B-H24 Plate (Table 4.2.1.0(b))
- AZ31B-H24 Sheet (Table 4.2.1.0(b))
- AZ31B-H26 Plate (Table 4.2.1.0(c))
- AZ31B-O Plate (Table 4.2.1.0(b))
- AZ31B-O Sheet (Table 4.2.1.0(b))
Source and Use
U.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, 31 January 2003 (public domain). The values are the handbook's design allowables as extracted from the chapter tables; check the printed table before use in a certified analysis, and note that MIL-HDBK-5J was superseded by MMPDS, whose later editions may differ. No warranty is given.