MIL-HDBK-5J Materials: Design Allowables by Alloy
498 handbook tables from MIL-HDBK-5J (31 January 2003), one page each: every dimension band and basis of the table, the temperature-effect curves the handbook maps to it, and the Ramberg-Osgood curves where an exponent is on file. Open a page, then analyse the material in the MIL-HDBK-5J tool, rank alloys with the Material Finder or overlay them against temperature with the Material Comparator.
Aluminum (223) Beryllium (11) Copper Alloy (2) Heat-Resistant (43) Hybrid (8) Magnesium Alloy (32) Miscellaneous (4) Steel (124) Titanium (51)
Magnesium Alloy
AM100A
- T6 Investment casting (Table 4.3.1.0(b))
- T6 Permanent mold casting (Table 4.3.1.0(b))
AZ31B
- F Extruded / hollow shapes (Table 4.2.1.0(d))
- F Extruded bar, rod, and / solid shapes (Table 4.2.1.0(d))
- F Extruded tube (Table 4.2.1.0(d))
- F Forging (Table 4.2.1.0(d))
- H24 Plate (Table 4.2.1.0(b))
- H24 Sheet (Table 4.2.1.0(b))
- H26 Plate (Table 4.2.1.0(c))
- O Plate (Table 4.2.1.0(b))
- O Sheet (Table 4.2.1.0(b))
AZ61A
- F Extruded / hollow / shapes (Table 4.2.2.0(b))
- F Extruded / tube (Table 4.2.2.0(b))
- F Extruded bar, rod, and solid / shapes (Table 4.2.2.0(b))
- F Forging (Table 4.2.2.0(b))
AZ91C
- T6 Investment casting (Table 4.3.2.0(b))
- T6 Sand casting (Table 4.3.2.0(b))
AZ91E
- T6 Sand casting (Table 4.3.2.0(c))
AZ92A
- T6 Investment Casting (Table 4.3.3.0(b))
- T6 Permanent mold / casting (Table 4.3.3.0(b))
- T6 Sand casting (Table 4.3.3.0(b))
EZ33A
- T5 Sand casting (Table 4.3.4.0(b))
QE22A
- T6 Sand casting (Table 4.3.5.0(b))
ZE41A
- T5 Sand casting (Table 4.3.6.0(b))
ZK60A
- F Extruded / hollow shapes (Table 4.2.3.0(b))
- F Extruded / tube (Table 4.2.3.0(b))
- F Extruded rod, bar, and solid shapes (Table 4.2.3.0(b))
- T5 Die / forging (Table 4.2.3.0(c))
- T5 Extruded / hollow / shapes (Table 4.2.3.0(c))
- T5 Extruded rod, bar, and solid shapes (Table 4.2.3.0(c))
- T5 Extruded tube (Table 4.2.3.0(c))
- T5 Hand / forging (Table 4.2.3.0(c))