ZK60A-F Extruded / tube: MIL-HDBK-5J Design Allowables
show SI units (MPa, GPa, kg/m³) open the MIL-HDBK-5J tool compare against temperature find alternatives
| Material class | Magnesium Alloy |
| Alloy / temper / form | ZK60A / F / Extruded / tube |
| Specifications | ASTM B 107 |
| Handbook | MIL-HDBK-5J, 31 January 2003, section 4.2.3.0, Table 4.2.3.0(b) (pdf page 20 of the chapter file) |
| Dimension bands | 1 |
| Density | 0.0659 lb/in3 |
Design Mechanical and Physical Properties (room temperature)
As printed in the handbook table. Bases: A and B are statistical minimums (99 % and 90 % probability at 95 % confidence), S the specification minimum. Grain directions: L longitudinal, LT long transverse, ST short transverse.
| Dimension band | 0.028–0.750 in, area 0–3 in2 | |
|---|---|---|
| Specification | ASTM B 107 | |
| Basis | S | |
| Ftu, ksi | L | 40 |
| Fty, ksi | L | 28 |
| Fcy, ksi | L | 20 |
| e, % | L | 5 |
| E, Msi | 6.5 | |
| Ec, Msi | 6.5 | |
| G, Msi | 2.4 | |
| ν | 0.35 | |
| ρ, lb/in3 | 0.0659 | |
Effect of Temperature
The handbook maps no temperature-effect figure to this table.
Other ZK60A Tables
- ZK60A-F Extruded / hollow shapes (Table 4.2.3.0(b))
- ZK60A-F Extruded rod, bar, and solid shapes (Table 4.2.3.0(b))
- ZK60A-T5 Die / forging (Table 4.2.3.0(c))
- ZK60A-T5 Extruded / hollow / shapes (Table 4.2.3.0(c))
- ZK60A-T5 Extruded rod, bar, and solid shapes (Table 4.2.3.0(c))
- ZK60A-T5 Extruded tube (Table 4.2.3.0(c))
- ZK60A-T5 Hand / forging (Table 4.2.3.0(c))
Source and Use
U.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, 31 January 2003 (public domain). The values are the handbook's design allowables as extracted from the chapter tables; check the printed table before use in a certified analysis, and note that MIL-HDBK-5J was superseded by MMPDS, whose later editions may differ. No warranty is given.