AISI 1025-Annealed Sheet, strip, and plate: MIL-HDBK-5J Design Allowables
show SI units (MPa, GPa, kg/m³) open the MIL-HDBK-5J tool compare against temperature find alternatives
| Material class | Steel |
| Alloy / temper / form | AISI 1025 / Annealed / Sheet, strip, and plate |
| Specifications | AMS 5046 and AMS-S-7952 |
| Handbook | MIL-HDBK-5J, 31 January 2003, section 2.2.1.0, Table 2.2.1.0(b) (pdf page 8 of the chapter file) |
| Dimension bands | 1 |
| Density | 0.284 lb/in3 |
Design Mechanical and Physical Properties (room temperature)
As printed in the handbook table. Bases: A and B are statistical minimums (99 % and 90 % probability at 95 % confidence), S the specification minimum. Grain directions: L longitudinal, LT long transverse, ST short transverse.
| Dimension band | all | |
|---|---|---|
| Specification | AMS 5046 and AMS-S-7952 | |
| Basis | S | |
| Ftu, ksi | L | 55 |
| LT | 55 | |
| Fty, ksi | L | 36 |
| LT | 36 | |
| Fcy, ksi | L | 36 |
| LT | 36 | |
| Fsu, ksi | L | 35 |
| LT | 35 | |
| Fbru (e/D = 2.0), ksi | L | 90 |
| LT | 90 | |
| E, Msi | 29 | |
| Ec, Msi | 29 | |
| G, Msi | 11 | |
| ν | 0.32 | |
| ρ, lb/in3 | 0.284 | |
Effect of Temperature
The handbook maps no temperature-effect figure to this table.
Other AISI 1025 Tables
- AISI 1025-All Bar (Table 2.2.1.0(b))
- AISI 1025-Normalized Tubing (Table 2.2.1.0(b))
Source and Use
U.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, 31 January 2003 (public domain). The values are the handbook's design allowables as extracted from the chapter tables; check the printed table before use in a certified analysis, and note that MIL-HDBK-5J was superseded by MMPDS, whose later editions may differ. No warranty is given.