2024-T361 Plate: MIL-HDBK-5J Design Allowables
show SI units (MPa, GPa, kg/m³) open the MIL-HDBK-5J tool compare against temperature find alternatives
| Material class | Aluminum |
| Alloy / temper / form | 2024 / T361 / Plate |
| Specifications | AMS-QQ-A-250/4 |
| Handbook | MIL-HDBK-5J, 31 January 2003, section 3.2.3.0, Table 3.2.3.0(b) (pdf page 71 of the chapter file) |
| Dimension bands | 1 |
| Density | 0.1 lb/in3 |
Design Mechanical and Physical Properties (room temperature)
As printed in the handbook table. Bases: A and B are statistical minimums (99 % and 90 % probability at 95 % confidence), S the specification minimum. Grain directions: L longitudinal, LT long transverse, ST short transverse.
| Dimension band | 0.250–0.500 in | |
|---|---|---|
| Specification | AMS-QQ-A-250/4 | |
| Basis | S | |
| Ftu, ksi | L | 67 |
| LT | 66 | |
| Fty, ksi | L | 54 |
| LT | 49 | |
| Fcy, ksi | L | 46 |
| LT | 52 | |
| Fsu, ksi | L | 41 |
| LT | 41 | |
| Fbru (e/D = 1.5), ksi | L | 109 |
| LT | 109 | |
| Fbru (e/D = 2.0), ksi | L | 135 |
| LT | 135 | |
| Fbry (e/D = 1.5), ksi | L | 81 |
| LT | 81 | |
| Fbry (e/D = 2.0), ksi | L | 96 |
| LT | 96 | |
| e, % | L | … |
| LT | 9 | |
| E, Msi | 10.7 | |
| Ec, Msi | 10.9 | |
| G, Msi | 4 | |
| ν | 0.33 | |
| ρ, lb/in3 | 0.1 | |
Effect of Temperature
Percent of the room-temperature value against temperature, digitized from the handbook figures (the shortest exposure of each figure, every 10 °F). Strength curves give the allowable at temperature; "after exposure" curves give the room-temperature property after a soak at that temperature.
Moduli at temperature
Other 2024 Tables
- 2024-T3 Clad flat sheet and plate (Table 3.2.3.0(e))
- 2024-T3 Drawn tubing (Table 3.2.3.0(g))
- 2024-T3 Sheet (Table 3.2.3.0(b))
- 2024-T3, T3510, and T3511 Extruded bar, rod, and shapes (Table 3.2.3.0(j))
- 2024-T351 Bar and rod; rolled, drawn, or cold-finished (Table 3.2.3.0(i))
- 2024-T351 Clad flat sheet and plate (Table 3.2.3.0(e))
- 2024-T351 Plate (Table 3.2.3.0(b))
- 2024-T361 Bar and rod; rolled, drawn, or cold-finished (Table 3.2.3.0(i))
- 2024-T361 Clad flat sheet and plate (Table 3.2.3.0(e))
- 2024-T361 Sheet (Table 3.2.3.0(b))
- 2024-T4 Bar and rod; rolled, drawn, or cold-finished (Table 3.2.3.0(i))
- 2024-T4 Clad coiled sheet (Table 3.2.3.0(e))
- 2024-T4 Coiled Sheet (Table 3.2.3.0(b))
- 2024-T42 Bar and rod; rolled, drawn, or cold-finished (Table 3.2.3.0(i))
- 2024-T42 Clad flat sheet and plate (Table 3.2.3.0(e))
- 2024-T42 Drawn tubing (Table 3.2.3.0(g))
- 2024-T42 Extruded bar, rod, and shapes (Table 3.2.3.0(j))
- 2024-T42 Flat Sheet and Plate (Table 3.2.3.0(b))
- 2024-T6 Bar and rod; rolled, drawn, or cold finished (Table 3.2.3.0(i))
- 2024-T62 Bar and rod; rolled, drawn, or cold finished (Table 3.2.3.0(i))
- 2024-T62 Clad flat sheet and plate (Table 3.2.3.0(e))
- 2024-T62 Flat Sheet and Plate (Table 3.2.3.0(b))
- 2024-T72 Clad flat sheet and plate (Table 3.2.3.0(e))
- 2024-T72 Flat Sheet and Plate (Table 3.2.3.0(b))
- 2024-T81 Clad flat sheet and plate (Table 3.2.3.0(e))
- 2024-T81 Drawn tubing (Table 3.2.3.0(g))
- 2024-T81 Sheet (Table 3.2.3.0(b))
- 2024-T81, T8510, and T8511 Extruded bar, rod, and shapes (Table 3.2.3.0(j))
- 2024-T851 Bar and rod; rolled, drawn, or cold finished (Table 3.2.3.0(i))
- 2024-T851 Clad flat sheet and plate (Table 3.2.3.0(e))
- 2024-T851 Plate (Table 3.2.3.0(b))
- 2024-T861 Clad flat sheet and plate (Table 3.2.3.0(e))
- 2024-T861 Plate (Table 3.2.3.0(b))
- 2024-T861 Sheet (Table 3.2.3.0(b))
Source and Use
U.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, 31 January 2003 (public domain). The values are the handbook's design allowables as extracted from the chapter tables; check the printed table before use in a certified analysis, and note that MIL-HDBK-5J was superseded by MMPDS, whose later editions may differ. No warranty is given.