Tools › Materials › Beryllium › Copper Beryllium-TH04 Strip

Copper Beryllium-TH04 Strip: MIL-HDBK-5J Design Allowables

Material classBeryllium
Alloy / temper / formCopper Beryllium / TH04 / Strip
SpecificationsAMS 4532
HandbookMIL-HDBK-5J, 31 January 2003, section 7.3.2.0, Table 7.3.2.0(c) (pdf page 14 of the chapter file)
Dimension bands1
Density0.298 lb/in3

Design Mechanical and Physical Properties (room temperature)

As printed in the handbook table. Bases: A and B are statistical minimums (99 % and 90 % probability at 95 % confidence), S the specification minimum. Grain directions: L longitudinal, LT long transverse, ST short transverse.

Dimension band0.000–0.188 in
SpecificationAMS 4532
BasisS
Ftu, ksiL190
LT…
Fty, ksiL165
LT…
Fcy, ksiL165
LT165
Fsu, ksiL95
LT95
Fbru (e/D = 1.5), ksiL247
LT247
Fbru (e/D = 2.0), ksiL323
LT323
Fbry (e/D = 1.5), ksiL231
LT231
Fbry (e/D = 2.0), ksiL247
LT247
e, %L1
LT…
E, Msi18.5
G, Msi7.3
ν0.27
ρ, lb/in30.298

Effect of Temperature

The handbook maps no temperature-effect figure to this table.

Other Copper Beryllium Tables

Source and Use

U.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, 31 January 2003 (public domain). The values are the handbook's design allowables as extracted from the chapter tables; check the printed table before use in a certified analysis, and note that MIL-HDBK-5J was superseded by MMPDS, whose later editions may differ. No warranty is given.