5086-H32 Sheet and plate: MIL-HDBK-5J Design Allowables
show SI units (MPa, GPa, kg/m³) open the MIL-HDBK-5J tool compare against temperature find alternatives
| Material class | Aluminum |
| Alloy / temper / form | 5086 / H32 / Sheet and plate |
| Specifications | AMS-QQ-A-250/7 |
| Handbook | MIL-HDBK-5J, 31 January 2003, section 3.5.3.0, Table 3.5.3.0(b) (pdf page 238 of the chapter file) |
| Dimension bands | 1 |
| Density | 0.096 lb/in3 |
Design Mechanical and Physical Properties (room temperature)
As printed in the handbook table. Bases: A and B are statistical minimums (99 % and 90 % probability at 95 % confidence), S the specification minimum. Grain directions: L longitudinal, LT long transverse, ST short transverse.
| Dimension band | 0.020–2.000 in | ||
|---|---|---|---|
| Specification | AMS-QQ-A-250/7 | ||
| Basis | A | B | |
| Ftu, ksi | L | 40 | 41 |
| LT | 40 | 41 | |
| Fty, ksi | L | 28 | 30 |
| LT | 26 | 28 | |
| Fcy, ksi | L | 26 | 28 |
| LT | 28 | 30 | |
| Fsu, ksi | L | 24 | 25 |
| LT | 24 | 25 | |
| Fbru (e/D = 1.5), ksi | L | 58 | 61 |
| LT | 58 | 61 | |
| Fbru (e/D = 2.0), ksi | L | 80 | 82 |
| LT | 80 | 82 | |
| Fbry (e/D = 1.5), ksi | L | 39 | 42 |
| LT | 39 | 42 | |
| Fbry (e/D = 2.0), ksi | L | 48 | 51 |
| LT | 48 | 51 | |
| E, Msi | 10.2 | 10.2 | |
| Ec, Msi | 10.4 | 10.4 | |
| G, Msi | 3.85 | 3.85 | |
| ρ, lb/in3 | 0.096 | 0.096 | |
Effect of Temperature
The handbook maps no temperature-effect figure to this table.
Other 5086 Tables
- 5086-H111 Extrusion (Table 3.5.3.0(b))
- 5086-H112 Extrusion (Table 3.5.3.0(b))
- 5086-H112 Sheet and plate (Table 3.5.3.0(b))
- 5086-H34 Sheet and plate (Table 3.5.3.0(b))
- 5086-H36 Sheet and plate (Table 3.5.3.0(b))
- 5086-H38 Sheet and plate (Table 3.5.3.0(b))
- 5086-O Extrusion (Table 3.5.3.0(b))
- 5086-O Sheet and plate (Table 3.5.3.0(b))
Source and Use
U.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, 31 January 2003 (public domain). The values are the handbook's design allowables as extracted from the chapter tables; check the printed table before use in a certified analysis, and note that MIL-HDBK-5J was superseded by MMPDS, whose later editions may differ. No warranty is given.