7475-T61 Sheet: MIL-HDBK-5J Design Allowables
show SI units (MPa, GPa, kg/m³) open the MIL-HDBK-5J tool compare against temperature find alternatives
| Material class | Aluminum |
| Alloy / temper / form | 7475 / T61 / Sheet |
| Specifications | AMS 4084 |
| Handbook | MIL-HDBK-5J, 31 January 2003, section 3.7.10.0, Table 3.7.10.0(b) (pdf page 460 of the chapter file) |
| Dimension bands | 1 |
| Density | 0.101 lb/in3 |
Design Mechanical and Physical Properties (room temperature)
As printed in the handbook table. Bases: A and B are statistical minimums (99 % and 90 % probability at 95 % confidence), S the specification minimum. Grain directions: L longitudinal, LT long transverse, ST short transverse.
| Dimension band | 0.040–0.249 in | |
|---|---|---|
| Specification | AMS 4084 | |
| Basis | S | |
| Ftu, ksi | L | 75 |
| LT | 75 | |
| Fty, ksi | L | 66 |
| LT | 64 | |
| Fcy, ksi | L | 64 |
| LT | 68 | |
| Fsu, ksi | L | 45 |
| LT | 45 | |
| Fbru (e/D = 1.5), ksi | L | 120 |
| LT | 120 | |
| Fbru (e/D = 2.0), ksi | L | 154 |
| LT | 154 | |
| Fbry (e/D = 1.5), ksi | L | 97 |
| LT | 97 | |
| Fbry (e/D = 2.0), ksi | L | 110 |
| LT | 110 | |
| e, % | L | 9 |
| LT | 9 | |
| E, Msi | 10 | |
| Ec, Msi | 10.5 | |
| G, Msi | 3.8 | |
| ν | 0.33 | |
| ρ, lb/in3 | 0.101 | |
Effect of Temperature
The handbook maps no temperature-effect figure to this table.
Other 7475 Tables
- 7475-T61 Clad sheet (Table 3.7.10.0(d))
- 7475-T651 Plate (Table 3.7.10.0(b))
- 7475-T7351 Plate (Table 3.7.10.0(c))
- 7475-T761 Clad sheet (Table 3.7.10.0(d))
- 7475-T761 Sheet (Table 3.7.10.0(b))
- 7475-T7651 Plate (Table 3.7.10.0(b))
Source and Use
U.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, 31 January 2003 (public domain). The values are the handbook's design allowables as extracted from the chapter tables; check the printed table before use in a certified analysis, and note that MIL-HDBK-5J was superseded by MMPDS, whose later editions may differ. No warranty is given.