5454-H112 Sheet and plate: MIL-HDBK-5J Design Allowables
show SI units (MPa, GPa, kg/m³) open the MIL-HDBK-5J tool compare against temperature find alternatives
| Material class | Aluminum |
| Alloy / temper / form | 5454 / H112 / Sheet and plate |
| Specifications | AMS-QQ-A-250/10 |
| Handbook | MIL-HDBK-5J, 31 January 2003, section 3.5.4.0, Table 3.5.4.0(b) (pdf page 248 of the chapter file) |
| Dimension bands | 2 |
| Density | 0.097 lb/in3 |
Design Mechanical and Physical Properties (room temperature)
As printed in the handbook table. Bases: A and B are statistical minimums (99 % and 90 % probability at 95 % confidence), S the specification minimum. Grain directions: L longitudinal, LT long transverse, ST short transverse.
| Dimension band | 0.250–0.499 in | 0.500–3.000 in | |
|---|---|---|---|
| Specification | AMS-QQ-A-250/10 | AMS-QQ-A-250/10 | |
| Basis | S | S | |
| Ftu, ksi | L | 32 | 31 |
| LT | 32 | 31 | |
| Fty, ksi | L | 18 | 12 |
| LT | 18 | 12 | |
| Fcy, ksi | L | 17 | 12 |
| LT | 18 | 12 | |
| Fsu, ksi | L | 20 | 19 |
| LT | 20 | 19 | |
| Fbru (e/D = 1.5), ksi | L | 48 | 46 |
| LT | 48 | 46 | |
| Fbru (e/D = 2.0), ksi | L | 64 | 62 |
| LT | 64 | 62 | |
| Fbry (e/D = 1.5), ksi | L | 25 | 20 |
| LT | 25 | 20 | |
| Fbry (e/D = 2.0), ksi | L | 31 | 24 |
| LT | 31 | 24 | |
| e, % | L | 8 | 8 |
| LT | … | … | |
| E, Msi | 10.2 | 10.2 | |
| Ec, Msi | 10.4 | 10.4 | |
| G, Msi | 3.85 | 3.85 | |
| ν | 0.33 | 0.33 | |
| ρ, lb/in3 | 0.097 | 0.097 | |
Effect of Temperature
The handbook maps no temperature-effect figure to this table.
Other 5454 Tables
- 5454-H111 Extrusion (Table 3.5.4.0(b))
- 5454-H112 Extrusion (Table 3.5.4.0(b))
- 5454-H32 Sheet and plate (Table 3.5.4.0(b))
- 5454-H34 Sheet and plate (Table 3.5.4.0(b))
- 5454-O Extrusion (Table 3.5.4.0(b))
- 5454-O Sheet and plate (Table 3.5.4.0(b))
Source and Use
U.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, 31 January 2003 (public domain). The values are the handbook's design allowables as extracted from the chapter tables; check the printed table before use in a certified analysis, and note that MIL-HDBK-5J was superseded by MMPDS, whose later editions may differ. No warranty is given.