HAYNES 230-2200 Anneal Plate: MIL-HDBK-5J Design Allowables
show SI units (MPa, GPa, kg/m³) open the MIL-HDBK-5J tool compare against temperature find alternatives
| Material class | Heat-Resistant |
| Alloy / temper / form | HAYNES 230 / 2200 Anneal / Plate |
| Specifications | AMS 5878 |
| Handbook | MIL-HDBK-5J, 31 January 2003, section 6.3.9.0, Table 6.3.9.0(b) (pdf page 97 of the chapter file) |
| Dimension bands | 2 |
| Density | 0.324 lb/in3 |
Design Mechanical and Physical Properties (room temperature)
As printed in the handbook table. Bases: A and B are statistical minimums (99 % and 90 % probability at 95 % confidence), S the specification minimum. Grain directions: L longitudinal, LT long transverse, ST short transverse.
| Dimension band | 0.000–0.400 in | 0.401–1.500 in | |||
|---|---|---|---|---|---|
| Specification | AMS 5878 | AMS 5878 | |||
| Basis | A | B | A | B | |
| Ftu, ksi | LT | 115 | 120 | 111 | 114 |
| Fty, ksi | LT | 50 | 55 | 48 | 51 |
| e, % | LT | 40 | 43 | 39 | 42 |
| ρ, lb/in3 | 0.324 | 0.324 | 0.324 | 0.324 | |
Effect of Temperature
Percent of the room-temperature value against temperature, digitized from the handbook figures (the shortest exposure of each figure, every 10 °F). Strength curves give the allowable at temperature; "after exposure" curves give the room-temperature property after a soak at that temperature.
Strength allowables at temperature, percent of room temperature
Moduli at temperature
Elongation and exposure effects
| °F | F_tu | F_ty |
|---|---|---|
| 100 | 99.3 | 99 |
| 200 | 95.3 | 93 |
| 300 | 91.6 | 86.7 |
| 400 | 88.6 | 81 |
| 500 | 86.5 | 76.3 |
| 600 | 85.3 | 72.8 |
| 700 | 84.5 | 70.6 |
| 800 | 83.9 | 69.4 |
| 1000 | 81.5 | 68.5 |
| 1200 | 74.2 | 66.4 |
Factors in percent of the room-temperature allowable.
Other HAYNES 230 Tables
- HAYNES 230-2250 Anneal Sheet (Table 6.3.9.0(b))
Source and Use
U.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, 31 January 2003 (public domain). The values are the handbook's design allowables as extracted from the chapter tables; check the printed table before use in a certified analysis, and note that MIL-HDBK-5J was superseded by MMPDS, whose later editions may differ. No warranty is given.