HAYNES HR-120-Annealed Sheet, Strip, and Plate: MIL-HDBK-5J Design Allowables
show SI units (MPa, GPa, kg/m³) open the MIL-HDBK-5J tool compare against temperature find alternatives
| Material class | Heat-Resistant |
| Alloy / temper / form | HAYNES HR-120 / Annealed / Sheet, Strip, and Plate |
| Specifications | AMS 5916 |
| Handbook | MIL-HDBK-5J, 31 January 2003, section 6.3.10.0, Table 6.3.10.0(b) (pdf page 110 of the chapter file) |
| Dimension bands | 1 |
| Density | 0.324 lb/in3 |
Design Mechanical and Physical Properties (room temperature)
As printed in the handbook table. Bases: A and B are statistical minimums (99 % and 90 % probability at 95 % confidence), S the specification minimum. Grain directions: L longitudinal, LT long transverse, ST short transverse.
| Dimension band | 0.750–2.000 in | |||
|---|---|---|---|---|
| Specification | AMS 5916 | |||
| Basis | A | B | S | |
| Ftu, ksi | LT | 90 | 101 | 90 |
| Fty, ksi | LT | 40 | 44 | 40 |
| e, % | LT | 30 | 30 | 30 |
| ρ, lb/in3 | 0.324 | 0.324 | 0.324 | |
Effect of Temperature
The handbook maps no temperature-effect figure to this table.
Source and Use
U.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, 31 January 2003 (public domain). The values are the handbook's design allowables as extracted from the chapter tables; check the printed table before use in a certified analysis, and note that MIL-HDBK-5J was superseded by MMPDS, whose later editions may differ. No warranty is given.