Tools › Materials › Steel › AISI 301and Relateda,b,c-Full Hard Sheet and strip

AISI 301and Relateda,b,c-Full Hard Sheet and strip: MIL-HDBK-5J Design Allowables

show SI units (MPa, GPa, kg/m³) open the MIL-HDBK-5J tool compare against temperature find alternatives

Material class	Steel
Alloy / temper / form	AISI 301and Relateda,b,c / Full Hard / Sheet and strip
Specifications	AMS 5519
Handbook	MIL-HDBK-5J, 31 January 2003, section 2.7.1.0, Table 2.7.1.0(b) (pdf page 223 of the chapter file)
Dimension bands	1
Density	0.286 lb/in3

Design Mechanical and Physical Properties (room temperature)

As printed in the handbook table. Bases: A and B are statistical minimums (99 % and 90 % probability at 95 % confidence), S the specification minimum. Grain directions: L longitudinal, LT long transverse, ST short transverse.

Dimension band		all
Specification		AMS 5519
Basis		A	B
F_tu, ksi	L	174	185
F_tu, ksi	LT	175	186
F_ty, ksi	L	137	153
F_ty, ksi	LT	125	142
F_cy, ksi	L	83	94
F_cy, ksi	LT	142	164
F_su, ksi	L	95	100
F_su, ksi	LT	95	100
F_bru (e/D = 2.0), ksi	L	346	361
F_bru (e/D = 2.0), ksi	LT	346	361
F_bry (e/D = 2.0), ksi	L	222	249
F_bry (e/D = 2.0), ksi	LT	222	249
e, %	L	…	…
e, %	LT	25	25
E, Msi		26	26
G, Msi		10.5	10.5
ν		0.27	0.27
ρ, lb/in3		0.286	0.286

Effect of Temperature

Percent of the room-temperature value against temperature, digitized from the handbook figures (the shortest exposure of each figure, every 10 °F). Strength curves give the allowable at temperature; "after exposure" curves give the room-temperature property after a soak at that temperature.

Strength allowables at temperature, percent of room temperature

Moduli at temperature

°F	F_tu	F_ty	F_cy L	F_cy LT	F_su	F_bru	F_bry
100	99.2	99.2	98.3	99.7	98.4	98.3	98.3
200	95.4	95.4	92.9	98.7	91.2	92	97
300	92.8	92.8	88.4	97.6	83.9	86.7	94.9
400	91.2	91.2	84.9	96.1	76.6	83	92.9
500	89.2	89.2	82.8	94.2	70.1	81.4	91.3
600	85.3	85.3	81.5	91.3	66.4	79.8	89.8
700	80.2	80.2	81	87.8	65.9	78.1	87.5
800	73.9	73.9	79.4	82.3	64.7	74.8	83.5
1000	57.3	57.3			55.4	62.4	66.4
1200	34.3	34.3

Factors in percent of the room-temperature allowable.

Other AISI 301and Relateda,b,c Tables

AISI 301and Relateda,b,c-� Hard Sheet and strip (Table 2.7.1.0(b))
AISI 301and Relateda,b,c-� Hard Sheet and strip (Table 2.7.1.0(b))
AISI 301and Relateda,b,c-� Hard Sheet and strip (Table 2.7.1.0(b))
AISI 301and Relateda,b,c-Annealed Sheet and strip (Table 2.7.1.0(b))

Source and Use

U.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, 31 January 2003 (public domain). The values are the handbook's design allowables as extracted from the chapter tables; check the printed table before use in a certified analysis, and note that MIL-HDBK-5J was superseded by MMPDS, whose later editions may differ. No warranty is given.