5083-O Extrusion: MIL-HDBK-5J Design Allowables
show SI units (MPa, GPa, kg/m³) open the MIL-HDBK-5J tool compare against temperature find alternatives
| Material class | Aluminum |
| Alloy / temper / form | 5083 / O / Extrusion |
| Specifications | AMS-QQ-A-200/4 |
| Handbook | MIL-HDBK-5J, 31 January 2003, section 3.5.2.0, Table 3.5.2.0(c) (pdf page 233 of the chapter file) |
| Dimension bands | 1 |
| Density | 0.096 lb/in3 |
Design Mechanical and Physical Properties (room temperature)
As printed in the handbook table. Bases: A and B are statistical minimums (99 % and 90 % probability at 95 % confidence), S the specification minimum. Grain directions: L longitudinal, LT long transverse, ST short transverse.
| Dimension band | 0–5 in | |
|---|---|---|
| Specification | AMS-QQ-A-200/4 | |
| Basis | S | |
| Ftu, ksi | L | 39 |
| LT | 40 | |
| Fty, ksi | L | 16 |
| LT | 24 | |
| e, % | L | 14 |
| LT | … | |
| E, Msi | 10.2 | |
| Ec, Msi | 10.4 | |
| G, Msi | 3.35 | |
| ν | 0.33 | |
| ρ, lb/in3 | 0.096 | |
Effect of Temperature
The handbook maps no temperature-effect figure to this table.
Other 5083 Tables
- 5083-H111 Extrusion (Table 3.5.2.0(c))
- 5083-H112 Extrusion (Table 3.5.2.0(c))
- 5083-H112 Sheet and plate (Table 3.5.2.0(b))
- 5083-H321 Sheet and plate (Table 3.5.2.0(b))
- 5083-H323 Sheet and plate (Table 3.5.2.0(b))
- 5083-H343 Sheet and plate (Table 3.5.2.0(b))
- 5083-O Sheet and plate (Table 3.5.2.0(b))
Source and Use
U.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, 31 January 2003 (public domain). The values are the handbook's design allowables as extracted from the chapter tables; check the printed table before use in a certified analysis, and note that MIL-HDBK-5J was superseded by MMPDS, whose later editions may differ. No warranty is given.