Tools › Materials › Titanium › Ti-6Al-4V-Solution treated and aged Rectangular bar

Ti-6Al-4V-Solution treated and aged Rectangular bar: MIL-HDBK-5J Design Allowables

show SI units (MPa, GPa, kg/m³) open the MIL-HDBK-5J tool compare against temperature find alternatives

Material class	Titanium
Alloy / temper / form	Ti-6Al-4V / Solution treated and aged / Rectangular bar
Specifications	AMS 4965a and MIL-T-9047
Handbook	MIL-HDBK-5J, 31 January 2003, section 5.4.1.0, Table 5.4.1.0(d) (pdf page 56 of the chapter file)
Dimension bands	9
Density	0.16 lb/in3

Design Mechanical and Physical Properties (room temperature)

As printed in the handbook table. Bases: A and B are statistical minimums (99 % and 90 % probability at 95 % confidence), S the specification minimum. Grain directions: L longitudinal, LT long transverse, ST short transverse.

Dimension band		0.000–0.500 in, width 0.501–8.000 in	0.501–1.000 in, width 1.001–4.000 in	0.501–1.000 in, width 4.001–8.000 in	1.001–1.500 in, width 1.501–4.000 in	1.001–1.500 in, width 4.001–8.000 in	1.501–2.000 in, width 2.001–4.000 in	1.501–2.000 in, width 4.001–8.000 in	2.001–3.000 in, width 3.001–8.000 in	3.001–4.000 in, width 4.001–8.000 in
Specification		AMS 4965a and MIL-T-9047	AMS 4965a and MIL-T-9047	AMS 4965a and MIL-T-9047	AMS 4965a and MIL-T-9047	AMS 4965a and MIL-T-9047	AMS 4965a and MIL-T-9047	AMS 4965a and MIL-T-9047	AMS 4965a and MIL-T-9047	AMS 4965a and MIL-T-9047
Basis		S	S	S	S	S	S	S	S	S
F_tu, ksi	L	160	155	150	150	145	145	140	135	130
F_tu, ksi	LT	160	155	150	150	145	145	140	135	130
F_ty, ksi	L	150	145	140	140	135	135	130	125	120
F_ty, ksi	LT	150	145	140	140	135	135	130	125	120
F_su, ksi	L	92	…	…	…	…	…	…	…	…
F_su, ksi	LT	92	…	…	…	…	…	…	…	…
e, %	L	10	10	10	10	10	10	10	10	8
e, %	LT	10	10	10	10	10	10	10	10	8
E, Msi		16.9	16.9	16.9	16.9	16.9	16.9	16.9	16.9	16.9
E_c, Msi		17.2	17.2	17.2	17.2	17.2	17.2	17.2	17.2	17.2
G, Msi		6.2	6.2	6.2	6.2	6.2	6.2	6.2	6.2	6.2
ν		0.31	0.31	0.31	0.31	0.31	0.31	0.31	0.31	0.31
ρ, lb/in3		0.16	0.16	0.16	0.16	0.16	0.16	0.16	0.16	0.16

Effect of Temperature

Percent of the room-temperature value against temperature, digitized from the handbook figures (the shortest exposure of each figure, every 10 °F). Strength curves give the allowable at temperature; "after exposure" curves give the room-temperature property after a soak at that temperature.

Strength allowables at temperature, percent of room temperature

Moduli at temperature

°F	F_cy	F_su	F_bru	F_bry
100	97.4	97.4	98	98
200	86.5	91.6	91.6	91.6
300	77.4	85.7	85.5	85.5
400	69.8	80.3	80	80
500	64.6	76.9	76.5	76.5
600	63.4	74.4	75.6	75.6
700	62.4	72.9	74.4	74.4
800	59.6	69.4	72.1	72.1
1000			53.7	53.7

Factors in percent of the room-temperature allowable.

Other Ti-6Al-4V Tables

Ti-6Al-4V-Alpha-beta or beta processed, / annealed Die forging (Table 5.4.1.0(f))
Ti-6Al-4V-Alpha-beta processed, annealed Die forging (Table 5.4.1.0(f))
Ti-6Al-4V-Annealed Bar (Table 5.4.1.0(c))
Ti-6Al-4V-Annealed Extrusion (Table 5.4.1.0(e))
Ti-6Al-4V-Annealed HIP Casting (Table 5.4.1.0(g))
Ti-6Al-4V-Annealed Plate (Table 5.4.1.0(b))
Ti-6Al-4V-Annealed Sheet (Table 5.4.1.0(b))
Ti-6Al-4V-Solution treated and aged Extrusion (Table 5.4.1.0(e))
Ti-6Al-4V-Solution treated and aged Round, square, and hexagon bar (Table 5.4.1.0(d))
Ti-6Al-4V-Solution treated and aged Sheet, strip, and plate (Table 5.4.1.0(b))

Source and Use

U.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, 31 January 2003 (public domain). The values are the handbook's design allowables as extracted from the chapter tables; check the printed table before use in a certified analysis, and note that MIL-HDBK-5J was superseded by MMPDS, whose later editions may differ. No warranty is given.