N-155-Solution treated Strip and plate: MIL-HDBK-5J Design Allowables
show SI units (MPa, GPa, kg/m³) open the MIL-HDBK-5J tool compare against temperature find alternatives
| Material class | Heat-Resistant |
| Alloy / temper / form | N-155 / Solution treated / Strip and plate |
| Specifications | AMS 5532 |
| Handbook | MIL-HDBK-5J, 31 January 2003, section 6.2.2.0, Table 6.2.2.0(b) (pdf page 16 of the chapter file) |
| Dimension bands | 1 |
| Density | 0.3 lb/in3 |
Design Mechanical and Physical Properties (room temperature)
As printed in the handbook table. Bases: A and B are statistical minimums (99 % and 90 % probability at 95 % confidence), S the specification minimum. Grain directions: L longitudinal, LT long transverse, ST short transverse.
| Dimension band | all | |
|---|---|---|
| Specification | AMS 5532 | |
| Basis | S | |
| Ftu, ksi | LT | 100 |
| e, % | LT | 40 |
| E, Msi | 29.2 | |
| Ec, Msi | 29.2 | |
| G, Msi | 11.2 | |
| ρ, lb/in3 | 0.3 | |
Effect of Temperature
Percent of the room-temperature value against temperature, digitized from the handbook figures (the shortest exposure of each figure, every 10 °F). Strength curves give the allowable at temperature; "after exposure" curves give the room-temperature property after a soak at that temperature.
Strength allowables at temperature, percent of room temperature
| °F | F_tu | F_ty |
|---|---|---|
| 100 | 98.1 | 97.1 |
| 200 | 92.3 | 89.7 |
| 300 | 88.3 | 83.8 |
| 400 | 86 | 78.6 |
| 500 | 84 | 74.4 |
| 600 | 83 | 70.4 |
| 700 | 81.8 | 67.1 |
| 800 | 80.6 | 63.8 |
| 1000 | 58 | |
| 1200 | 53.4 |
Factors in percent of the room-temperature allowable.
Other N-155 Tables
- N-155-Solution treated Sheet (Table 6.2.2.0(b))
- N-155-Solution treated Tubing (Table 6.2.2.0(b))
Source and Use
U.S. Department of Defense (2003). Metallic Materials and Elements for Aerospace Vehicle Structures. MIL-HDBK-5J, 31 January 2003 (public domain). The values are the handbook's design allowables as extracted from the chapter tables; check the printed table before use in a certified analysis, and note that MIL-HDBK-5J was superseded by MMPDS, whose later editions may differ. No warranty is given.