Tools › Civil and Geotechnical › Transportation › Traffic Signal Warrants


Traffic Signal Warrants

Paste an intersection's hourly counts and pick the lanes; get, hour by hour, what those volumes give under Warrant 1 (eight-hour volume), Warrant 2 (four-hour volume) and Warrant 3 (peak hour) of the federal Manual on Uniform Traffic Control Devices, 11th Edition with Revision 1 (December 2025), with every hour drawn on the manual's warrant curve. The page reports what the counts give under each warrant; it does not judge whether to install a signal. The manual itself states that satisfying a warrant does not in itself require a signal, and it requires an engineering study.

  • Warrant 1 by Table 4C-1: Condition A, Condition B and their combination, with the 70 % and 56 % columns as an option

  • Warrant 2 and Warrant 3 on the curves of Figures 4C-1 to 4C-4, read from the manual's own drawing, with each hour as a labeled dot

  • Hours too close to a curve to call from the figure are flagged, and one hour is worked in full

  • Warrants 4 to 9, state supplements and the engineering study are outside the tool

Traffic Signal Warrants

/

Intersection




Hourly counts (vehicles per hour)



Peak-hour delay, Warrant 3 Item A (optional: enter all three or none)








References

Federal Highway Administration. (2025). Manual on Uniform Traffic Control Devices for Streets and Highways, 11th ed. with Revision 1. U.S. Department of Transportation, Washington, DC.

Federal Highway Administration. (2022). Manual on Uniform Traffic Control Devices for Streets and Highways, 2009 ed. with Revisions 1, 2 and 3. U.S. Department of Transportation, Washington, DC.


DISCLAIMER: The methods and calculation on aNOWysis.com are provided as means to educate the reader. There is no warranty, expessed or implied, as to the relevance or accuracy of the methods or calculations. All calculations should be checked by a qualified analyst for appropriateness and accuracy. We will not be held liable for any damages, injuries or deaths caused by using methods or calculations from this site.