Tools › Structures › Statics

Statics

3 tools in the Structures area.

Equilibrium and Free-Body Diagram

Enter the points, supports and loads of a rigid body; get its free-body diagram drawn to scale and the support reactions solved step by step from the three equilibrium equations. Click a case under Try this to see one worked.

6 worked examples reproduced, listed on the tool page.

Truss by Joints and Sections

Enter the joints, members, supports and loads of a plane truss; get every member force (tension or compression) drawn on the truss and worked out step by step by the method of joints, with zero-force members found first and an optional method-of-sections cut. Click a case under Try this to see one solved.

6 worked examples reproduced, listed on the tool page.

Cable Sag and Tension

Enter the span, the weight of a cable, rope or line and one thing you know about it (its sag, its length or how hard it is pulled); get the tension at each support, the sag and the length, with your cable drawn to scale. Statics only: not a design check for rigging that carries people.

7 worked examples reproduced, listed on the tool page.

Other Structures sections

Materials · Composites · Frames and Trusses · Beams · Loads and Dynamics · Joints · Stress and Strain · Stability · Plates and Shells · Thin-Walled Structures · Contact · Stress Concentrations · Fatigue · Damage Tolerance