Tools › Environmental › Spill Prevention

Spill Prevention

1 tool in the Environmental area.

Secondary Containment Sizing

Size or check the secondary containment of bulk oil storage tanks under the U.S. SPCC rule (40 CFR part 112): the containment must hold the entire capacity of the largest single container and sufficient freeboard to contain precipitation. The tool follows the sample calculations and worksheets of the U.S. EPA's SPCC Guidance for Regional Inspectors: gross volume of a dike, sloped berm or remote impoundment, less the volume displaced by the other tanks below the top of the wall, against the largest container plus the rain from an entered design storm. It reports the net volume, the percent of the largest container, the freeboard, the wall height needed, and a capacity screen of the facility against the rule's thresholds. A calculation aid: whether the freeboard is sufficient is a matter of good engineering practice decided by the person who certifies the Plan.

1 worked example reproduced, listed on the tool page.

Other Environmental sections

Emissions and Climate · Air Quality · Groundwater · Health and Safety