Tools › Mechanical Design › Vehicle Dynamics

Vehicle Dynamics

1 tool in the Mechanical Design area.

Accident Reconstruction

The standard speed, energy and time-distance calculations of vehicle collision reconstruction, each reported as a low, nominal and high value from the entered ranges of friction and measurement: speed from skid marks over several surfaces with grade and braking efficiency, critical speed from a yaw mark by chord and middle ordinate with superelevation, launch speed for a fall, flip or vault, impact speeds and speed changes of two vehicles by conservation of momentum in the plane, crush energy and equivalent barrier speed by the NHTSA CRASH3 damage method with its stiffness categories and force-direction correction, and time and distance before impact with perception-reaction time and an avoidance check. Each result is shown as formula, numbers and answer. The tool reports quantities only and draws no conclusion about fault.

1 worked example reproduced, listed on the tool page.

Other Mechanical Design sections

Shafts · Gears · Bearings · Springs · Fasteners and Power Screws · Pressure Vessels · Tolerances · Mass Properties · Vibration · Acoustics · Brakes, Clutches and Belts · Machining and Manufacturing · Lubrication and Wear · Mechanisms