Tools › Structures › Stability › Beam Column Cases


Beam Column Cases

Beam-column analysis by the closed-form cases of NACA Technical Memorandum 985 (Cassens, Tables for Computing Various Cases of Beam Columns): a member of constant bending stiffness under an axial load together with transverse loads, end moments, fixed or continuous ends, or an initial curvature. Choose one of the 21 tabulated cases, enter the quantities shown on its figure, and every equation of the solution is written out with the values substituted: k, the angle α = L/k, the constants A and B, the fixing and maximum moments, and the moment, deflection and slope at any station. Allowables are optional and give margins of safety on stress or moment and on buckling.

  • All 21 cases of the memorandum: end moment, cantilever, uniform and concentrated loads with pinned, fixed and continuous ends, sine and parabolic initial curvature, two and three loads, partial load, overhang, applied couple

  • Every step shown with numbers: k = √(EI/P), α = L/k, the constants A and B, special moments, and M, y and y′ at a chosen station

  • Buckling load of the case from the angle the memorandum lists (180°, 257.45°, 360°, or the root of the determinant)

  • Optional allowables: margin of safety on the extreme-fiber stress P/A + Mc/I or on the moment, and on buckling, with limit or ultimate loads

  • Charts of the moment and the deflection along the member, with and without the axial load

Beam Column Cases


Unit System: /

Loading Case


Pin-ended member under axial compression P with a moment M_0 applied at the right end
Pin-ended member under axial tension P with a moment M_0 applied at the right end
Cantilever fixed at the right end, with the axial compression P and a transverse load Q at the free left end
Pin-ended member under P with a uniform load g
Pin-ended member under P with a uniform load g and end moments M_1 (left) and M_2 (right)
Member fixed at the left end and pinned at the right, under P and a uniform load g; fixing moment M_E
Member fixed at both ends under P and a uniform load g; fixing moments M_E
Center span L of a three-span member with side spans L_1 and L_2; uniform load g and axial load P on the center span only
Pin-ended member with an initial sine bow f at mid-length, under P
Pin-ended member with an initial parabolic bow f at mid-length, under P
Pin-ended member with an initial parabolic bow f, under P and a uniform load g
Member with an initial parabolic bow f, fixed at the left end and pinned at the right, under P and a uniform load g
Member with an initial parabolic bow f, fixed at both ends, under P and a uniform load g
Pin-ended member under P with a concentrated load Q at b from the left end (d from the right) and end moments M_1 and M_2
Member fixed at the left end and pinned at the right, under P and a concentrated load Q at b from the left end
Member fixed at both ends under P and a concentrated load Q at b from the left end
Center span L of a three-span member with side spans L_1 and L_2; concentrated load Q at b and axial load P on the center span only
Pin-ended member under P with two concentrated loads Q_1 and Q_2 at spacings a_1, a_2, a_3
Pin-ended member under P with three concentrated loads Q_1, Q_2, Q_3 at spacings a_1 to a_4
Pin-ended member under P with a uniform load p over the length b from the left end
Member on two supports a distance b apart with an overhang a; P, Q and M_0 act at the free end of the overhang
Pin-ended member under P with a couple M applied at b from the left end

Member





Loads and Dimensions of the Case






















Margin of Safety (optional)






Load Level of the Entered Loads





References

Cassens, J. (1941). Tables for Computing Various Cases of Beam Columns. NACA Technical Memorandum 985, National Advisory Committee for Aeronautics, Washington, DC.

Timoshenko, S. P., and Gere, J. M. (1961). Theory of Elastic Stability, 2nd ed. McGraw-Hill, New York.

Worked Examples

Published examples this tool reproduces; each page lists the inputs to enter and the printed answers.

All worked examples


DISCLAIMER: The methods and calculation on aNOWysis.com are provided as means to educate the reader. There is no warranty, expessed or implied, as to the relevance or accuracy of the methods or calculations. All calculations should be checked by a qualified analyst for appropriateness and accuracy. We will not be held liable for any damages, injuries or deaths caused by using methods or calculations from this site.