Tools › Fluids and Heat Transfer › Thermodynamic Cycles › Thermodynamic Process Analyzer › Example
Steam turbine at 85 % isentropic efficiency: work, wet exhaust and entropy generated
| Tool | Thermodynamic Process Analyzer |
| Source | original |
| Level | Undergraduate |
Problem
Steam enters an adiabatic turbine at 8 MPa and 500 °C and leaves at 10 kPa. The isentropic efficiency is 85 % and the flow is 10 kg/s (illustrative values). Find the exit state, the power and the entropy generated.
Inputs to Enter
- Water and steam, turbine; state 1 by pressure and temperature: 8,000 kPa, 500 °C
- Exit pressure 10 kPa, isentropic efficiency 85 %, mass flow 10 kg/s
Answers
- State 1 (superheated, 205 °C above the boiling point 295.01 °C): h_1 = 3,399.37 kJ/kg, s_1 = 6.7264 kJ/(kg·K)
- Ideal exit: x_2s = (6.7264 − 0.6492)/7.500 = 0.8103, h_2s = 2,130.17 kJ/kg, so w_s = 1,269.2 kJ/kg
- Actual work w = 0.85 · 1,269.2 = 1,078.8 kJ/kg; h_2 = 2,320.55 kJ/kg; x_2 = 0.8899 at 45.81 °C
- Power 10 · 1,078.8 = 10,788 kW
- Entropy generated 7.3233 − 6.7264 = 0.5969 kJ/(kg·K), 5.969 kW/K; lost work at 25 °C surroundings 1,779.6 kW
Notes
Open this case in the tool: /analysis-tools/thermal-fluids/cycles/thermo-process-analyzer/?try=steam-turbine. It is the page's opening case. Properties are IAPWS-IF97; the case is checked against an independent Python calculation, not taken from a book.
More Examples for This Tool
- Throttling valve: saturated water at 1 MPa flashes to 15 % steam at 100 kPa
- Air compressor from 100 to 800 kPa: polytropic (n = 1.3) against isentropic and isothermal work
- Steam nozzle from 100 psia and 500 °F to 1 atm at 90 % efficiency
- Boiling 1 kg of water at 1 atm: 2,256.5 kJ of heat, of which 169.4 kJ pushes the atmosphere back
- Isothermal expansion of air from 500 to 100 kPa: the heat added all becomes work
- DOE handbook Mollier example: steam at 700 psia and 680 °F expanded at constant entropy to 140 psia
- DOE handbook condenser: saturated steam at 40 °C condensed and subcooled to 30 °C