Tools › Fluids and Heat Transfer › Thermodynamic Cycles › Thermodynamic Process Analyzer › Example
Isothermal expansion of air from 500 to 100 kPa: the heat added all becomes work
| Tool | Thermodynamic Process Analyzer |
| Source | original |
| Level | Undergraduate |
Problem
One kilogram of air in a piston and cylinder expands slowly at a constant 300 K from 500 kPa to 100 kPa. Find the work done, the heat added and the entropy change.
Inputs to Enter
- Air with variable specific heats, isothermal to a pressure; state 1: 500 kPa, 300 K
- Final pressure 100 kPa, mass 1 kg
Answers
- Heat added T(s_2 − s_1) = 300 · (6.8704 − 6.4084) = 138.60 kJ
- Internal energy unchanged (214.35 kJ/kg at both ends), so the work done by the air is also 138.60 kJ = R T ln 5 = 0.28705 · 300 · 1.6094
- Entropy change 0.4620 kJ/K; the volume grows from 0.17223 to 0.86115 m³/kg
Notes
Open this case in the tool: /analysis-tools/thermal-fluids/cycles/thermo-process-analyzer/?try=isothermal-air. The shaded area under the hyperbola on the P-v diagram is the work.
More Examples for This Tool
- Steam turbine at 85 % isentropic efficiency: work, wet exhaust and entropy generated
- Throttling valve: saturated water at 1 MPa flashes to 15 % steam at 100 kPa
- Air compressor from 100 to 800 kPa: polytropic (n = 1.3) against isentropic and isothermal work
- Steam nozzle from 100 psia and 500 °F to 1 atm at 90 % efficiency
- Boiling 1 kg of water at 1 atm: 2,256.5 kJ of heat, of which 169.4 kJ pushes the atmosphere back
- DOE handbook Mollier example: steam at 700 psia and 680 °F expanded at constant entropy to 140 psia
- DOE handbook condenser: saturated steam at 40 °C condensed and subcooled to 30 °C