Tools › Fluids and Heat Transfer › Thermodynamic Cycles › Thermodynamic Process Analyzer › Example
Air compressor from 100 to 800 kPa: polytropic (n = 1.3) against isentropic and isothermal work
| Tool | Thermodynamic Process Analyzer |
| Source | original |
| Level | Undergraduate |
Problem
Air at 100 kPa and 300 K is compressed to 800 kPa in a cooled compressor that follows P v^1.3 = constant. Find the work input and the heat removed per kilogram, and compare with an uncooled isentropic compressor and with perfect (isothermal) cooling.
Inputs to Enter
- Air with variable specific heats, polytropic compressor; state 1: 100 kPa, 300 K
- Exit pressure 800 kPa, polytropic exponent 1.3, mass flow 1 kg/s
Answers
- Exit volume 0.17394 m³/kg and temperature 484.76 K (isentropic exit 539.77 K)
- Work input n/(n − 1) · (P_2 v_2 − P_1 v_1) = 229.82 kJ/kg; heat removed 42.55 kJ/kg
- Isentropic work 244.04 kJ/kg (the polytropic path needs 5.8 % less); isothermal work R T ln 8 = 179.07 kJ/kg
- With constant specific heats (k = 1.4) the closed forms give 229.82 kJ/kg polytropic and 179.07 kJ/kg isothermal
Notes
Open this case in the tool: /analysis-tools/thermal-fluids/cycles/thermo-process-analyzer/?try=air-compressor. Cooling during compression moves the path on the P-v diagram toward the isotherm and shrinks the work.
More Examples for This Tool
- Steam turbine at 85 % isentropic efficiency: work, wet exhaust and entropy generated
- Throttling valve: saturated water at 1 MPa flashes to 15 % steam at 100 kPa
- Steam nozzle from 100 psia and 500 °F to 1 atm at 90 % efficiency
- Boiling 1 kg of water at 1 atm: 2,256.5 kJ of heat, of which 169.4 kJ pushes the atmosphere back
- Isothermal expansion of air from 500 to 100 kPa: the heat added all becomes work
- DOE handbook Mollier example: steam at 700 psia and 680 °F expanded at constant entropy to 140 psia
- DOE handbook condenser: saturated steam at 40 °C condensed and subcooled to 30 °C