Tools › Electrical and Controls › Electric Machines › Induction Motor Equivalent Circuit › Example
460 V four-pole induction motor: operating point at 2.4 % slip, and a start that takes 4.2 times the current for 0.45 times the torque
| Tool | Induction Motor Equivalent Circuit |
| Source | original |
| Level | Undergraduate |
Problem
A 460 V, 60 Hz, four-pole, wye-connected induction motor has the per-phase circuit R1 = 0.22 Ω, X1 = 0.55 Ω, R2 = 0.13 Ω, X2 = 0.75 Ω, Xm = 18 Ω (rotor values referred to the stator) and 500 W of rotational losses. At a slip of 2.4 % find the stator current, power factor, air-gap power, shaft output, shaft torque and efficiency, then the starting torque and current and the pull-out torque.
Inputs to Enter
- Line voltage 460 V, 60 Hz, 4 poles, wye; R1 0.22, X1 0.55, R2 0.13, X2 0.75, Xm 18 Ω per phase
- Rotational losses 500 W; slip 2.4 %
Answers
- Synchronous speed 120 × 60 / 4 = 1,800 rpm; shaft speed (1 − 0.024) × 1,800 = 1,757 rpm; phase voltage 460 / √3 = 265.6 V
- Z2 = 0.13 / 0.024 + j0.75 = 5.417 + j0.75 Ω; Zf = j18 ∥ Z2 = 4.607 + j2.051 Ω; Zin = 4.827 + j2.601 = 5.484 ∠ 28.3° Ω
- I1 = 265.6 / 5.484 = 48.43 A at −28.3°; power factor 0.880 lagging; I2 = 44.67 A
- Input 33,970 W; stator copper loss 1,548 W; air-gap power 3 × 44.67² × 0.13 / 0.024 = 32,420 W; rotor copper loss 778.1 W; converted 31,640 W; output 31,140 W; efficiency 91.68 %
- Induced torque 32,420 / 188.50 = 172.0 N·m; shaft torque 31,140 / 183.97 = 169.3 N·m
- Thévenin equivalent 257.7 V behind 0.2071 + j0.5361 Ω; starting torque 77.72 N·m at 201.9 A (4.17 times the operating current, 0.452 times its torque); pull-out torque 350.0 N·m at a slip of 9.98 % (1,620 rpm)
Notes
The tool opens on this case; press Submit, or open it in the tool: /analysis-tools/electrical/machines/induction-motor-equivalent-circuit/?try=four-times-the-current-to-start. An illustrative machine, not a nameplate. Constant circuit parameters: a real cage motor starts with a higher rotor resistance than it runs with. Checked against an independent numpy and scipy computation (test_induction_motor_equivalent_circuit.php).
More Examples for This Tool
- Wound-rotor induction motor: ten times the rotor resistance moves the pull-out torque to standstill without changing it
- Induction motor on 80 % voltage: every point of the torque-speed curve falls to 64 %
- Induction motor circuit parameters from the DC, no-load and blocked-rotor tests, full circuit against the classroom short form