Tools › Civil and Geotechnical › Soils › Proctor Compaction Curve › Example

Standard Proctor test on a silty clay: five points, and a peak that depends on the curve drawn

ToolProctor Compaction Curve
Sourceoriginal
LevelUndergraduate

Problem

Five specimens of a silty clay are compacted by the standard test in a 1/30 ft³ mold that weighs 9.35 lb. What are the maximum dry density and the optimum water content, and how much do they depend on the curve drawn through the points?

Inputs to Enter

  • Mold volume 0.0333 ft³; mold mass 9.35 lbm; specific gravity 2.70; water density 62.43 lb/ft³; specified compaction 95 %
  • Mold + wet soil 13.167 / 13.372 / 13.525 / 13.581 / 13.516 lbm at water contents 12.5 / 14.6 / 16.4 / 18.3 / 20.4 %
Open the Proctor Compaction Curve tool (loaded with this example)

Answers

  • Point 3: wet soil 13.525 − 9.350 = 4.175 lbm; wet density 4.175 / 0.0333 = 125.4 lb/ft³; dry density 125.4 / (1 + 16.4/100) = 107.7 lb/ft³
  • Dry densities 101.9 / 105.4 / 107.7 / 107.4 / 103.9 lb/ft³
  • Least-squares cubic: maximum dry density 107.8 lb/ft³ at an optimum water content of 17.4 %, between points 3 and 4
  • The four fits: 107.6 to 108.0 lb/ft³ at 17.0 to 17.4 %
  • At the peak: zero-air-voids density 114.7 lb/ft³, saturation 83 %; 95 % of the maximum is 102.5 lb/ft³

Notes

The tool opens on this case; press Submit, or open it in the tool: /analysis-tools/civil/soils/proctor-compaction-curve/?try=peak-depends-on-the-fit. Illustrative readings, no real soil. The peak is read from a fitted curve, so the four fits are listed side by side; checked against an independent numpy and scipy computation (test_proctor_compaction_curve.php).

More Examples for This Tool