Tools › Civil and Geotechnical › Soils › Proctor Compaction Curve › Example
Field density tests against a compaction curve: one test at 93 % where 95 % is specified
| Tool | Proctor Compaction Curve |
| Source | original |
| Level | Undergraduate |
Problem
A standard compaction curve is fitted to five laboratory points. Three field density tests give the wet density and water content of the fill. What is the relative compaction of each against a specified 95 %?
Inputs to Enter
- Advanced mode. Mold 0.0333 ft³ and 9.35 lbm; mold + wet soil 13.425 / 13.658 / 13.841 / 13.864 / 13.757 lbm at 8.1 / 10.0 / 12.1 / 13.9 / 16.0 %; specific gravity 2.68; specified 95 %
- Field tests: wet density 122.7 / 129.3 / 131.0 lb/ft³ at 9.8 / 12.4 / 13.0 %
Answers
- Laboratory curve (least-squares cubic): maximum 120.1 lb/ft³ at 12.4 %
- Field test 1: dry density 122.7 / (1 + 9.8/100) = 111.7 lb/ft³; relative compaction 111.7 / 120.1 × 100 = 93.0 %, below 95 %, and 2.6 points dry of optimum
- Field tests 2 and 3: 95.8 % and 96.5 %, at or above 95 %
- The four fits put the maximum at 120.1 to 120.3 lb/ft³, which moves each relative compaction by up to 0.2 points
Notes
Open this case in the tool: /analysis-tools/civil/soils/proctor-compaction-curve/?try=field-test-93-against-95. Illustrative readings. The tool states each comparison; it does not accept or reject a fill.
More Examples for This Tool
- Standard Proctor test on a silty clay: five points, and a peak that depends on the curve drawn
- USBR 5500 laboratory compaction example: five specimens with moisture dishes, hand-drawn peak against fitted peaks
- A compaction point beyond the zero-air-voids line: a reading no soil can produce
- Modified against standard Proctor on one soil: the peak moves up and toward the dry side