Tools › Building Systems › Lighting and Electrical › Cable Pulling Tension › Example

One conduit run pulled from either end: 4,030 lb one way, 1,450 lb the other

ToolCable Pulling Tension
Sourceoriginal
LevelProfessional

Problem

Three cables, each 1.25 in. in diameter and 1.9 lb/ft, lie cradled in a conduit of 4.026 in. inside diameter. From end A the run is 350 ft straight, a 90 degree bend of 3 ft radius, 40 ft straight, a second 90 degree bend of 3 ft radius and 15 ft straight to end B, all level. The coefficient of friction is 0.35 and the cable enters with 50 lb. Find the weight correction factor, the tension at the end of every segment for a pull from A to B and from B to A, and the sidewall pressure at the bends.

Inputs to Enter

  • Three cables cradled, cable diameter 1.25 in, cable weight 1.9 lb/ft each, conduit inside diameter 4.026 in, friction coefficient 0.35
  • Incoming tension 50 lb; allowable tension 6,000 lb and allowable sidewall pressure 500 lb/ft typed in as illustrative entries
  • Rows: level 350 ft; horizontal bend right 90°, R 3 ft; level 40 ft; horizontal bend left 90°, R 3 ft; level 15 ft
Open the Cable Pulling Tension tool (loaded with this example)

Answers

  • Weight correction factor K_w = 1 + (4/3)(1.25/(4.026 − 1.25))² = 1.270 (1.12 if the cables lay in a triangle); total weight 3 × 1.9 = 5.7 lb/ft; jam ratio 1.05 × 4.026/1.25 = 3.38
  • A to B: 50 + 0.35 × 1.270 × 5.7 × 350 = 937 lb after the long straight; 1,884 lb after the first bend; 1,985 lb; 3,992 lb after the second bend; 4,030 lb at B
  • B to A: 88 lb, 178 lb, 280 lb, 563 lb after the bends, then the long straight adds 887 lb: 1,450 lb at A, 2.8 times less
  • Second bend, A to B: T_out = 1,985 cosh(0.6984) + √(1,985² + 17.1²) sinh(0.6984) = 3,992 lb; sidewall pressure (3 × 1.270 − 2)/3 × 3,992/3 = 803 lb/ft
  • Highest sidewall pressure pulled B to A: 113 lb/ft at the first bend of the table

Notes

The tool's default inputs are this case; press Submit, or open /analysis-tools/buildings/electrical/cable-pulling-tension/?try=pull-from-b-third-of-tension. Illustrative run with no maker's data; the allowables are entries the page compares with, not limits it supplies. Checked against an independent numerical integration of the force balance.

More Examples for This Tool