Tools › Structures › Statics › Truss by Joints and Sections › Example
Four-panel Pratt bridge truss: every member by the method of joints and three by one section
| Tool | Truss by Joints and Sections |
| Source | Original example (illustrative geometry and loads); checked against an independent numpy solution of the joint equations and the site's matrix tool (test_truss_joints_sections.php). |
| Level | Undergraduate |
Problem
A Pratt truss spans 48 ft in four 12 ft panels and is 9 ft deep, on a pin at A and a roller at E. The lower joints B, C and D carry 3,000 lb, 6,000 lb and 3,000 lb. Find the reactions, the zero-force member, the force in every member by the method of joints, and the forces in FG, CF and BC from a single cut through the second panel.
Inputs to Enter
- Joints in ft: A (0, 0), B (12, 0), C (24, 0), D (36, 0), E (48, 0), F (12, 9), G (24, 9), H (36, 9)
- Members: AB, BC, CD, DE, FG, GH, AF, EH, BF, CG, DH, CF, CH (13 members, 3 reactions, 8 joints: 13 + 3 = 16 = 2 × 8)
- Loads down: 3,000 lb at B, 6,000 lb at C, 3,000 lb at D; section cut through FG, CF, BC
Answers
- ΣM_A = 0: E_y (48) − (3,000)(12) − (6,000)(24) − (3,000)(36) = 0 → E_y = 6,000 lb; A_y = 6,000 lb; A_x = 0
- Zero-force: CG, by rule 2 at joint G (FG and GH are in one line, no load at G)
- Joint A: F_AF (0.6) + 6,000 = 0 → F_AF = −10,000 lb (compression); F_AB = 8,000 lb (tension)
- Chords AB, BC, CD, DE 8,000 lb T; top chord FG, GH 12,000 lb C; end posts AF, EH 10,000 lb C; verticals BF, DH 3,000 lb T; diagonals CF, CH 5,000 lb T
- Section, part A-B-F kept: ΣM_C → F_FG = −12,000 lb; ΣF_y → F_CF = 5,000 lb; ΣM_F → F_BC = 8,000 lb, the same as by joints
Notes
The tool opens on this case; press Submit, or open this case in the tool: /analysis-tools/structures/statics/truss-joints-sections/?try=pratt-bridge. In SI the chip uses 4 m panels, 3 m depth and 15 / 30 / 15 kN: chords 40 kN T, top chord 60 kN C, end posts 50 kN C.
More Examples for This Tool
- Three-member triangular truss under a load with a sideways part
- Howe truss with an off-center load and a sideways force: unequal reactions and a section through parallel chords
- Warren truss: three member forces from one section near midspan
- Cantilever truss on a wall: zero-force members at the free corner and a section that needs no reactions
- Fink roof truss with snow on one slope: a chain of zero-force members and a section with its moment point at the support