Tools › Structures › Statics › Truss by Joints and Sections › Example
Fink roof truss with snow on one slope: a chain of zero-force members and a section with its moment point at the support
| Tool | Truss by Joints and Sections |
| Source | Original example (illustrative loads); checked against an independent numpy solution of the joint equations. |
| Level | Undergraduate |
Problem
A Fink (W) roof truss spans 24 ft and rises 9 ft: A (0, 0), B (6, 4.5), F (12, 9), G (18, 4.5), E (24, 0) on the rafters and C (8, 0), D (16, 0) on the bottom chord, with a pin at A and a roller at E. Snow loads the left slope only: 1,200 lb at B and 600 lb at the ridge F. Find the zero-force members, the member forces, and BF, CF and CD from one cut.
Inputs to Enter
- Joints in ft: A (0, 0), B (6, 4.5), C (8, 0), D (16, 0), E (24, 0), F (12, 9), G (18, 4.5)
- Members: AB, BF, FG, EG (rafters), AC, CD, DE (bottom chord), BC, CF, DF, DG (web)
- Loads down: 1,200 lb at B, 600 lb at F; cut through BF, CF, CD
Answers
- Reactions: E_y = (1,200 × 6 + 600 × 12) / 24 = 600 lb, A_y = 1,200 lb
- Zero-force: DG by rule 2 at G (FG and EG in one line); then DF by rule 2 at D, once DG is set aside (CD and DE in one line)
- Rafters AB 2,000, BF 1,500, FG and EG 1,000 lb C; bottom chord AC 1,600, CD and DE 800 lb T; web BC 984.9 lb C, CF 984.9 lb T
- Section, part A-B-C kept: BF and CD cross at the support A, so ΣM_A = 0 gives F_CF (7.31) − (1,200)(6) = 0 → F_CF = 984.9 lb; ΣM_C → F_BF = −1,500 lb; ΣM_F → F_CD = 800 lb
Notes
Open this case in the tool: /analysis-tools/structures/statics/truss-joints-sections/?try=fink-roof-snow. The web members on the unloaded side carry nothing for this loading; with snow on both slopes they do.
More Examples for This Tool
- Four-panel Pratt bridge truss: every member by the method of joints and three by one section
- Three-member triangular truss under a load with a sideways part
- Howe truss with an off-center load and a sideways force: unequal reactions and a section through parallel chords
- Warren truss: three member forces from one section near midspan
- Cantilever truss on a wall: zero-force members at the free corner and a section that needs no reactions