Tools › Structures › Statics › Truss by Joints and Sections › Example

Cantilever truss on a wall: zero-force members at the free corner and a section that needs no reactions

ToolTruss by Joints and Sections
SourceOriginal example; hand statics with 6-8-10 triangles.
LevelUndergraduate

Problem

A two-panel cantilever truss (8 ft panels, 6 ft deep) is held at a wall by a pin at the top joint B and a roller at the bottom joint A. The top joints D and F carry 900 lb and 1,500 lb downward. Find the reactions, the zero-force members, all member forces, and BD, AD and AC from a cut next to the wall.

Inputs to Enter

  • Joints in ft: A (0, 0), B (0, 6), C (8, 0), D (8, 6), E (16, 0), F (16, 6)
  • Members: AB, BD, DF, AC, CE, CD, EF, AD, CF; pin at B, roller on a wall at A (horizontal reaction)
  • Loads down: 900 lb at D, 1,500 lb at F; cut through BD, AD, AC
Open the Truss by Joints and Sections tool

Answers

  • ΣM_B = 0: A_x (6) − (900)(8) − (1,500)(16) = 0 → A_x = 5,200 lb to the right; B_x = −5,200 lb; B_y = 2,400 lb
  • Zero-force: CE and EF, by rule 1 at the free corner E (two members in different directions, no load, no support)
  • CF 2,500 lb C, DF 2,000 lb T, CD 1,500 lb T, AC 2,000 lb C, AD 4,000 lb C, BD 5,200 lb T, AB 2,400 lb T
  • Section: the free part C-D-E-F is kept, so no reaction enters; ΣM_A → F_BD = 5,200 lb, ΣF_y → F_AD = −4,000 lb, ΣM_D → F_AC = −2,000 lb

Notes

Open this case in the tool: /analysis-tools/structures/statics/truss-joints-sections/?try=cantilever-wall. The top chord is in tension and the bottom chord in compression, the reverse of a truss supported at both ends.

More Examples for This Tool