Tools › Structures › Statics › Truss by Joints and Sections › Example

Howe truss with an off-center load and a sideways force: unequal reactions and a section through parallel chords

ToolTruss by Joints and Sections
SourceOriginal example (illustrative); checked against the site's matrix tool and hand statics for the reactions.
LevelUndergraduate

Problem

A four-panel Howe truss (8 ft panels, 6 ft deep, diagonals BG and DG rising toward the center) rests on a pin at A and a roller at E. It carries 9,000 lb at B, 3,000 lb at C and a 2,000 lb force to the right at the top joint G. Find the reactions, the member forces, and FG, BG and BC from a cut through the second panel.

Inputs to Enter

  • Joints in ft: A (0, 0), B (8, 0), C (16, 0), D (24, 0), E (32, 0), F (8, 6), G (16, 6), H (24, 6)
  • Members: AB, BC, CD, DE, FG, GH, AF, EH, BF, CG, DH, BG, DG
  • Loads: 9,000 lb down at B, 3,000 lb down at C, 2,000 lb to the right at G; cut through FG, BG, BC
Open the Truss by Joints and Sections tool

Answers

  • ΣM_A = 0: E_y (32) − (9,000)(8) − (3,000)(16) − (2,000)(6) = 0 → E_y = 4,125 lb; A_y = 7,875 lb; A_x = −2,000 lb
  • End posts AF 13,125 lb C and EH 6,875 lb C; bottom chord AB 12,500, BC and CD 11,000, DE 5,500 lb T; top chord FG 10,500 and GH 5,500 lb C
  • Verticals BF 7,875, CG 3,000, DH 4,125 lb T; diagonals BG 1,875 lb T and DG 6,875 lb C
  • Section, part A-B-F kept: moments about B give F_FG, the sum of forces in y gives F_BG (the chords FG and BC are parallel), moments about G give F_BC

Notes

Open this case in the tool: /analysis-tools/structures/statics/truss-joints-sections/?try=howe-off-center. No zero-force member appears: every joint is loaded, supported or has members in three directions.

More Examples for This Tool