Tools › Electrical and Controls › Circuits › Circuit Analysis (DC and AC) › Example
Unbalanced Wheatstone bridge: detector current by node equations and by the Thévenin equivalent
| Tool | Circuit Analysis (DC and AC) |
| Source | original |
| Level | Undergraduate |
Problem
A 10 V source feeds a bridge with arms R1 = 100 Ω and R3 = 220 Ω on one side, R2 = 150 Ω and R4 = 100 Ω on the other, and a 50 Ω detector R5 between the two midpoints. Find the node voltages, the detector current and the Thévenin equivalent the detector sees.
Inputs to Enter
- DC steady state, ground node 0, Thévenin seen by R5
- V1 10 V from a (+) to 0; R1 100 Ω a–b; R2 150 Ω a–c; R3 220 Ω b–0; R4 100 Ω c–0; R5 50 Ω b–c
Answers
- Node equations give V_b = 5.769 V and V_c = 4.965 V, so the detector carries (5.769 − 4.965) / 50 = 16.08 mA from b to c
- With R5 removed: V_th = 10 · 220/320 − 10 · 100/250 = 6.875 − 4.000 = 2.875 V; R_th = 100‖220 + 150‖100 = 68.75 + 60 = 128.8 Ω; I_N = 22.33 mA
- Check: 2.875 / (128.8 + 50) = 16.08 mA, the same current
- The source delivers 75.87 mA and 758.7 mW; the five resistors absorb 179.0 + 169.0 + 151.3 + 246.5 + 12.93 = 758.7 mW
- The most any detector could draw is V_th² / (4 R_th) = 16.05 mW; the 50 Ω detector draws 12.93 mW
Notes
The tool opens on this case; press Submit, or open it in the tool: /analysis-tools/electrical/circuits/circuit-analysis/?try=wheatstone-bridge. Illustrative values; checked against the closed forms above and an independent numpy solution (test_circuit_analysis.php).
More Examples for This Tool
- Voltage divider: 24 V across 4, 8 and 12 Ω in series (DOE Fundamentals Handbook)
- Two batteries and three resistors: node-voltage analysis (DOE Fundamentals Handbook, Figure 45)
- Two loops with three voltage sources: the loop-equation example solved by node equations (DOE Fundamentals Handbook, Figure 37)
- Thévenin equivalent seen by a load, with a voltage source and a current source, and maximum power transfer
- Series RLC circuit at resonance: 100 V across the capacitor from a 10 V source
- RC low-pass filter at its corner frequency: output 0.707 of the input, 45° behind
- Series R-C circuit on 120 V, 60 Hz: impedance, power factor and the power triangle (DOE Fundamentals Handbook)