Tools › Electrical and Controls › Circuits › Circuit Analysis (DC and AC) › Example

Two loops with three voltage sources: the loop-equation example solved by node equations (DOE Fundamentals Handbook, Figure 37)

ToolCircuit Analysis (DC and AC)
SourceU.S. Department of Energy (1992). DOE Fundamentals Handbook: Electrical Science, Volume 1 of 4. DOE-HDBK-1011/1-92, U.S. Department of Energy, Washington, DC. Module 2, Basic DC Theory, Figures 37 to 42 and pp. 49–54.
LevelUndergraduate

Problem

An 8 V source and R1 = 50 Ω form the left branch, a 40 V source and R2 = 100 Ω the right branch, and a 10 V source in series with R3 = 200 Ω the center leg of a two-loop circuit. Find the current in each resistor and the voltage across it.

Inputs to Enter

  • DC steady state, ground node 0 (the bottom rail)
  • V1 8 V from P (+) to 0; R1 50 Ω P–J; R2 100 Ω J–Q; R3 200 Ω 0–M; V2 10 V from J (+) to M; V3 40 V from 0 (+) to Q
Open the Circuit Analysis (DC and AC) tool

Answers

  • I1 = 47/175 = 268.6 mA in R1 (book 268.6 mA)
  • I2 = 345.7 mA in R2 (book 345.8 mA, found from the rounded I1)
  • I3 = I2 − I1 = 77.14 mA in R3 (book 77.2 mA)
  • Voltages: 13.43 V, 34.57 V, 15.43 V (book 13.43, 34.58, 15.44)
  • The three sources supply 2.149 + 0.771 + 13.83 = 16.75 W, which the resistors absorb

Notes

Enter the six rows listed (no Try this chip for this case). The source polarities are read from the handbook's loop equations (2-17) and (2-18), which the tool's currents satisfy to round-off. The handbook's last digits differ because it carries I1 rounded to four figures.

More Examples for This Tool