Tools › Electrical and Controls › Circuits › Circuit Analysis (DC and AC) › Example
Thévenin equivalent seen by a load, with a voltage source and a current source, and maximum power transfer
| Tool | Circuit Analysis (DC and AC) |
| Source | original |
| Level | Undergraduate |
Problem
A 12 V source feeds node b through 6 Ω; a 3 Ω resistor and a 2 A current source (arrow into b) also sit between b and ground; a 2 Ω resistor leads from b to the load terminal c, where a 4 Ω load is connected to ground. Find the Thévenin and Norton equivalent seen by the load and the power it draws.
Inputs to Enter
- DC steady state, ground node 0, Thévenin seen by R4
- V1 12 V from a (+) to 0; R1 6 Ω a–b; R2 3 Ω b–0; I1 2 A into b from 0; R3 2 Ω b–c; R4 4 Ω c–0
Answers
- Open circuit: V_b = (12/6 + 2) / (1/6 + 1/3) = 8 V, so V_th = 8.000 V
- Sources set to zero: R_th = 2 + 6‖3 = 4.000 Ω; Norton current I_N = 8 / 4 = 2.000 A
- Load current 8 / (4 + 4) = 1.000 A, load voltage 4.000 V, load power 4.000 W
- P_max = V_th² / (4 R_th) = 4.000 W: the 4 Ω load is matched and draws 100 % of the maximum
Notes
Open this case in the tool: /analysis-tools/electrical/circuits/circuit-analysis/?try=thevenin-load. Illustrative values chosen to come out round; checked against an independent numpy solution.
More Examples for This Tool
- Unbalanced Wheatstone bridge: detector current by node equations and by the Thévenin equivalent
- Voltage divider: 24 V across 4, 8 and 12 Ω in series (DOE Fundamentals Handbook)
- Two batteries and three resistors: node-voltage analysis (DOE Fundamentals Handbook, Figure 45)
- Two loops with three voltage sources: the loop-equation example solved by node equations (DOE Fundamentals Handbook, Figure 37)
- Series RLC circuit at resonance: 100 V across the capacitor from a 10 V source
- RC low-pass filter at its corner frequency: output 0.707 of the input, 45° behind
- Series R-C circuit on 120 V, 60 Hz: impedance, power factor and the power triangle (DOE Fundamentals Handbook)