Tools › Electrical and Controls › Circuits › Circuit Analysis (DC and AC) › Example
Series R-C circuit on 120 V, 60 Hz: impedance, power factor and the power triangle (DOE Fundamentals Handbook)
| Tool | Circuit Analysis (DC and AC) |
| Source | U.S. Department of Energy (1992). DOE Fundamentals Handbook: Electrical Science, Volume 3 of 4. DOE-HDBK-1011/3-92, U.S. Department of Energy, Washington, DC. Module 9, Basic AC Power, Figure 6 and pp. 8–9. |
| Level | Undergraduate |
Problem
A 60 Ω resistance and an 80 Ω capacitive reactance are in series with a 120 V source. Find the impedance, the current, the power factor and the true, reactive and apparent power.
Inputs to Enter
- AC steady state, 60 Hz, rms values, ground node 0
- V1 120 V ∠ 0° from a (+) to 0; R1 60 Ω a–b; C1 33.157 μF b–0 (the capacitance whose reactance is 80 Ω at 60 Hz)
Answers
- Z = 60 − j80 Ω, magnitude 100 Ω (book: 100 Ω); current 1.200 A ∠ 53.13° (book: 1.2 amps)
- Power factor 0.6000 leading (book 0.60)
- P = 86.40 W (book 86.4 watts); S = 144.0 VA (book 144 VA)
- Q = 115.2 var capacitive (book 114.9 VAR, from sin θ rounded to 0.798)
Notes
Enter the three rows listed with the analysis set to AC at 60 Hz (no Try this chip for this case). The handbook gives the reactance, not the capacitance; C = 1 / (2π · 60 · 80) = 33.157 μF.
More Examples for This Tool
- Unbalanced Wheatstone bridge: detector current by node equations and by the Thévenin equivalent
- Voltage divider: 24 V across 4, 8 and 12 Ω in series (DOE Fundamentals Handbook)
- Two batteries and three resistors: node-voltage analysis (DOE Fundamentals Handbook, Figure 45)
- Two loops with three voltage sources: the loop-equation example solved by node equations (DOE Fundamentals Handbook, Figure 37)
- Thévenin equivalent seen by a load, with a voltage source and a current source, and maximum power transfer
- Series RLC circuit at resonance: 100 V across the capacitor from a 10 V source
- RC low-pass filter at its corner frequency: output 0.707 of the input, 45° behind