Tools › Electrical and Controls › Circuits › Circuit Analysis (DC and AC) › Example
Voltage divider: 24 V across 4, 8 and 12 Ω in series (DOE Fundamentals Handbook)
| Tool | Circuit Analysis (DC and AC) |
| Source | U.S. Department of Energy (1992). DOE Fundamentals Handbook: Electrical Science, Volume 1 of 4. DOE-HDBK-1011/1-92, U.S. Department of Energy, Washington, DC. Module 2, Basic DC Theory, Figure 29 and pp. 36–37. |
| Level | Undergraduate |
Problem
A 24 V source is applied to three resistors of 4 Ω, 8 Ω and 12 Ω in series between points A, B, C and D. Find the current and the voltage across each resistor.
Inputs to Enter
- DC steady state, ground node D
- V1 24 V from A (+) to D; R1 4 Ω A–B; R2 8 Ω B–C; R3 12 Ω C–D
Answers
- Current 24 / (4 + 8 + 12) = 1.000 A (book: 1 amp)
- Drops: AB 4.000 V, BC 8.000 V, CD 12.000 V (book: 4, 8 and 12 volts); A to C 12 V
- Node voltages from D: V_A = 24.00 V, V_B = 20.00 V, V_C = 12.00 V; the source supplies 24.00 W
Notes
Open this case in the tool: /analysis-tools/electrical/circuits/circuit-analysis/?try=voltage-divider.
More Examples for This Tool
- Unbalanced Wheatstone bridge: detector current by node equations and by the Thévenin equivalent
- Two batteries and three resistors: node-voltage analysis (DOE Fundamentals Handbook, Figure 45)
- Two loops with three voltage sources: the loop-equation example solved by node equations (DOE Fundamentals Handbook, Figure 37)
- Thévenin equivalent seen by a load, with a voltage source and a current source, and maximum power transfer
- Series RLC circuit at resonance: 100 V across the capacitor from a 10 V source
- RC low-pass filter at its corner frequency: output 0.707 of the input, 45° behind
- Series R-C circuit on 120 V, 60 Hz: impedance, power factor and the power triangle (DOE Fundamentals Handbook)