Tools › Civil and Geotechnical › Soils › Sieve Analysis and Soil Classification › Example
Liquid limit from four blow counts: a sandy silt half a point below the A-line
| Tool | Sieve Analysis and Soil Classification |
| Source | original |
| Level | Undergraduate |
Problem
Four liquid limit trials close the groove at 15, 22, 28 and 34 blows with water contents of 46.3, 44.6, 43.9 and 42.9 %; two plastic limit threads crumble at 27.2 and 26.9 %. The soil has 62 % fines. Find the liquid limit from the flow curve, the plasticity index and the class.
Inputs to Enter
- Total dry mass 300 g; retained: 3/8 in 0, No. 4 6, No. 10 9, No. 40 30, No. 200 69 g; pan 186 g
- Atterberg limits from lab trials: blows 15 / 22 / 28 / 34, water content 46.3 / 44.6 / 43.9 / 42.9 %; plastic limit trials 27.2 and 26.9 %
Answers
- Flow curve by least squares: w = 57.23 − 9.317 log10 N (R² = 0.993); at 25 blows 44.2 %, reported as LL = 44
- Plastic limit (27.2 + 26.9) / 2 = 27.1, reported as 27; plasticity index 44 − 27 = 17
- A-line at LL 44: 0.73 × 24 = 17.52; the point is 0.52 below it: silt, ML; 38 % coarser than No. 200, mostly sand: sandy silt
- Within one point of the A-line, so the borderline symbol ML/CL applies; AASHTO A-7-6(9), GI = 5.94 + 3.29 = 9.23
Notes
Open this case in the tool: /analysis-tools/civil/soils/sieve-analysis-soil-classification/?try=silt-just-under-the-a-line. Illustrative readings. One more point of plasticity index would make the soil a sandy lean clay, CL; the Unified symbol changes while the AASHTO group stays A-7-6.
More Examples for This Tool
- Sieve analysis of a gap-graded gravel: Cu of 102, yet poorly graded (GP, A-1-b)
- A fine sand with 8 % fines: the dual symbol SP-SM and AASHTO A-3
- A fat clay: CH on the plasticity chart, A-7-6 with a group index of 37
- Bureau of Reclamation gradation forms: gravel sieved whole, sand sieved on a 59.1 g split