Tools › Civil and Geotechnical › Soils › Sieve Analysis and Soil Classification › Example
Sieve analysis of a gap-graded gravel: Cu of 102, yet poorly graded (GP, A-1-b)
| Tool | Sieve Analysis and Soil Classification |
| Source | original |
| Level | Undergraduate |
Problem
A 2,000 g oven-dry sample of sandy gravel is shaken through eight sieves. Most of it is coarse gravel or fine sand, with little in between. Find the percent passing each sieve, D10, D30 and D60, the coefficients of uniformity and curvature, and the Unified and AASHTO classes.
Inputs to Enter
- Total dry mass 2,000 g; non-plastic fines
- Retained: 1-1/2 in 0, 3/4 in 700, 3/8 in 420, No. 4 60, No. 10 40, No. 40 160, No. 100 440, No. 200 140 g; pan 40 g
Answers
- Percent passing: 100 / 65 / 44 / 41 / 39 / 31 / 9 / 2; gravel 59 %, sand 39 %, fines 2 %; the masses add up to the total (loss 0)
- D60 = 9.5 × (19 / 9.5)^((60 − 44) / (65 − 44)) = 16.11 mm; D30 = 0.4053 mm; D10 = 0.1573 mm
- Cu = 16.11 / 0.1573 = 102; Cc = 0.4053² / (0.1573 × 16.11) = 0.0649
- Unified: more gravel than sand, fines under 5 %, Cu ≥ 4 but Cc below 1: poorly graded gravel with sand, GP
- AASHTO: No. 40 passing 31 % is over the 30 of A-1-a; A-1-b fits: A-1-b(0)
Notes
The tool's default inputs are this case; press Submit, or open /analysis-tools/civil/soils/sieve-analysis-soil-classification/?try=wide-range-still-poorly-graded. Illustrative masses. A wide range of sizes is not enough: the flat stretch of the curve between 9.5 mm and 0.425 mm pulls D30 down and Cc out of the 1 to 3 band. Values checked in test_sieve_analysis_soil_classification.php against an independent numpy script.
More Examples for This Tool
- A fine sand with 8 % fines: the dual symbol SP-SM and AASHTO A-3
- A fat clay: CH on the plasticity chart, A-7-6 with a group index of 37
- Liquid limit from four blow counts: a sandy silt half a point below the A-line
- Bureau of Reclamation gradation forms: gravel sieved whole, sand sieved on a 59.1 g split