Tools › Structures › Statics › Equilibrium and Free-Body Diagram › Example
Beam on a pin and a roller: a point load and a uniform load over part of the span
| Tool | Equilibrium and Free-Body Diagram |
| Source | Original example; closed forms R = P b / L and the resultant w L of a uniform load at its mid-length. |
| Level | Undergraduate |
Problem
A 20 ft beam rests on a pin at its left end A and a roller at its right end D. It carries 2,000 lb at 6 ft from A and 150 lb/ft over the last 10 ft. Replace the uniform load by its resultant and find the reactions.
Inputs to Enter
- Points A (0, 0), B (6, 0), C (10, 0), D (20, 0) ft; pin at A, roller on a floor at D
- Loads: 2,000 lb down at B; uniform 150 lb/ft from C to D, acting straight down
Answers
- Resultant of the uniform load: R = w L = (150)(10) = 1,500 lb at 5 ft from C (15 ft from A)
- ΣM_A = 0: −(2,000)(6) − (1,500)(15) + D_y (20) = 0 → D_y = 1,725 lb
- ΣF_y = 0: A_y = 3,500 − 1,725 = 1,775 lb; ΣF_x = 0: A_x = 0
Notes
Open this case in the tool: /analysis-tools/structures/statics/equilibrium-free-body/?try=beam-point-uniform. In SI (6 m span, 10 kN at 2 m, 4 kN/m over the last 3 m): D_y = 12,333 N, A_y = 9,667 N.
More Examples for This Tool
- Ladder against a smooth wall with a person on it: reactions and the friction needed at the floor
- Cantilever bracket: triangular load and an inclined pull, reactions at the fixed end
- Crane boom held by a pin and a cable: cable tension by moments about the pin
- Sign plate hung from a pin and an inclined cable, with a side push
- L-shaped bracket with a couple and a side force on a pin and a roller