Tools › Structures › Statics › Equilibrium and Free-Body Diagram › Example
Crane boom held by a pin and a cable: cable tension by moments about the pin
| Tool | Equilibrium and Free-Body Diagram |
| Source | Original example; three-force equilibrium of a boom, moments about the pin. |
| Level | Undergraduate |
Problem
A 20 ft boom is pinned at its foot A and rises to its tip C, 16 ft out and 12 ft up. A cable runs from the tip to an anchor D on the mast, 16 ft above A. The boom weighs 600 lb (at its middle) and a 2,000 lb load hangs from the tip. Find the cable tension and the pin reaction.
Inputs to Enter
- Points A (0, 0), B (8, 6), C (16, 12) on the boom and anchor D (0, 16) off the body, in ft
- Supports: pin at A; cable from C to the point D
- Loads: 600 lb down at B, 2,000 lb down at C
Answers
- The cable leaves C at 165.96° (toward D); its perpendicular distance from A is 15.52 ft
- ΣM_A = 0: −(600)(8) − (2,000)(16) + T_CD (15.52) = 0 → T_CD = 2,371 lb (tension)
- ΣF_x = 0: A_x = 2,300 lb to the right; ΣF_y = 0: A_y = 2,600 − 575 = 2,025 lb upward
Notes
Open this case in the tool: /analysis-tools/structures/statics/equilibrium-free-body/?try=crane-boom-cable. In SI (4.8 m by 3.6 m boom, 2,700 N and 9,000 N): T_CD = 10,669 N.
More Examples for This Tool
- Ladder against a smooth wall with a person on it: reactions and the friction needed at the floor
- Beam on a pin and a roller: a point load and a uniform load over part of the span
- Cantilever bracket: triangular load and an inclined pull, reactions at the fixed end
- Sign plate hung from a pin and an inclined cable, with a side push
- L-shaped bracket with a couple and a side force on a pin and a roller