Tools › Structures › Statics › Equilibrium and Free-Body Diagram › Example

Cantilever bracket: triangular load and an inclined pull, reactions at the fixed end

ToolEquilibrium and Free-Body Diagram
SourceOriginal example; closed forms: resultant ½ w L of a triangular load at one third of the length from its larger end, M = P L for a cantilever.
LevelUndergraduate

Problem

A 6 ft bracket is built into a wall at A. A load rising linearly from zero at the wall to 120 lb/ft at the tip B presses down on it, and a 500 lb force pulls on the tip at 300° (down and to the right, 60° below the horizontal). Find the two force components and the moment at the wall.

Inputs to Enter

  • Points A (0, 0), B (6, 0) ft; fixed support at A
  • Loads: varying load 0 lb/ft at A to 120 lb/ft at B, acting straight down; 500 lb at B at an angle of 300°
Open the Equilibrium and Free-Body Diagram tool

Answers

  • Triangle: R = ½ (120)(6) = 360 lb at 4 ft from A; the 500 lb force has F_x = 250 lb, F_y = −433.0 lb
  • ΣM_A = 0: −(360)(4) − (433.0)(6) + M_A = 0 → M_A = 4,038 lb-ft counterclockwise
  • ΣF_x = 0: A_x = −250 lb (to the left); ΣF_y = 0: A_y = 360 + 433.0 = 793.0 lb upward

Notes

Open this case in the tool: /analysis-tools/structures/statics/equilibrium-free-body/?try=cantilever-bracket. In SI (1.8 m, 1,800 N/m, 2,000 N): M_A = 5,062 N-m, A_y = 3,352 N.

More Examples for This Tool