Tools › Structures › Statics › Equilibrium and Free-Body Diagram › Example
Ladder against a smooth wall with a person on it: reactions and the friction needed at the floor
| Tool | Equilibrium and Free-Body Diagram |
| Source | Original example. The method is checked against Ling, S. J., Sanny, J., and Moebs, W. (2016). University Physics, Volume 1. OpenStax, Rice University, Houston, TX. Section 12.2, Example 12.5. |
| Level | Undergraduate |
Problem
A 13 ft ladder weighing 40 lb leans against a smooth wall with its foot 5 ft from the wall and its top 12 ft up. A 180 lb person stands three quarters of the way up. Find the reactions at the floor and the wall, and whether the foot slips if the coefficient of static friction at the floor is 0.5.
Inputs to Enter
- Points: A (0, 0) foot, B (2.5, 6) ladder weight, C (3.75, 9) person, D (5, 12) top, in ft
- Supports: pin at A (rough floor), roller on a wall at D (smooth wall: horizontal reaction only)
- Loads: 40 lb down at B, 180 lb down at C; friction check at A on a horizontal floor, μ_s = 0.5
Answers
- ΣM_A = 0: −(40)(2.5) − (180)(3.75) − D_x (12) = 0 → D_x = −64.58 lb (the wall pushes the ladder 64.58 lb to the left)
- ΣF_x = 0: A_x = 64.58 lb to the right; ΣF_y = 0: A_y = 40 + 180 = 220 lb upward; resultant at A 229.3 lb at 73.64°
- Friction needed μ = 64.58 / 220 = 0.294, available 0.5 (110 lb): the foot holds
- Check about D: counterclockwise 1,100 lb-ft, clockwise 1,100 lb-ft
Notes
The tool opens on this case; press Submit, or open /analysis-tools/structures/statics/equilibrium-free-body/?try=ladder-smooth-wall. In SI the chip uses a 3.9 m ladder with 180 N and 800 N: D_x = −287.5 N, A_y = 980 N, μ needed 0.293.
More Examples for This Tool
- Beam on a pin and a roller: a point load and a uniform load over part of the span
- Cantilever bracket: triangular load and an inclined pull, reactions at the fixed end
- Crane boom held by a pin and a cable: cable tension by moments about the pin
- Sign plate hung from a pin and an inclined cable, with a side push
- L-shaped bracket with a couple and a side force on a pin and a roller