Tools › Structures › Statics › Equilibrium and Free-Body Diagram › Example
L-shaped bracket with a couple and a side force on a pin and a roller
| Tool | Equilibrium and Free-Body Diagram |
| Source | Original example; a couple enters the moment equation unchanged about any point. |
| Level | Undergraduate |
Problem
An L-shaped bracket runs 6 ft along the floor from a pin at A to a roller at C and then 4 ft straight up to D. A clockwise couple of 800 lb-ft acts at B, 3 ft from A, and a 300 lb force pushes to the right at D. Find the reactions.
Inputs to Enter
- Points A (0, 0), B (3, 0), C (6, 0), D (6, 4) ft; pin at A, roller on a floor at C
- Loads: couple 800 lb-ft clockwise at B; 300 lb to the right at D
Answers
- ΣM_A = 0: −800 − (300)(4) + C_y (6) = 0 → C_y = 333.3 lb upward
- ΣF_x = 0: 300 + A_x = 0 → A_x = −300 lb (to the left)
- ΣF_y = 0: A_y = −333.3 lb: the pin holds the bracket down
Notes
Open this case in the tool: /analysis-tools/structures/statics/equilibrium-free-body/?try=l-bracket-couple. The couple appears in the moment equation as 800 lb-ft whatever the point, and in neither force equation. In SI (1.8 m by 1.2 m, 1,100 N-m, 1,300 N): C_y = 1,478 N.
More Examples for This Tool
- Ladder against a smooth wall with a person on it: reactions and the friction needed at the floor
- Beam on a pin and a roller: a point load and a uniform load over part of the span
- Cantilever bracket: triangular load and an inclined pull, reactions at the fixed end
- Crane boom held by a pin and a cable: cable tension by moments about the pin
- Sign plate hung from a pin and an inclined cable, with a side push