Tools › Structures › Statics › Cable Sag and Tension › Example
Zip line on a sloping span with a rider at the middle, cable length known
| Tool | Cable Sag and Tension |
| Source | original |
| Level | Undergraduate |
Problem
A zip-line cable 301.5 ft long and weighing 0.5 lb/ft spans 300 ft horizontally, the far end 20 ft lower. A 200 lb rider hangs at the middle of the span. Find the cable tension at each end, the sag below the chord and the lowest point.
Inputs to Enter
- Span 300 ft, right end higher by −20 ft, cable weight 0.5 lb/ft, point load 200 lb at 150 ft from the left
- Known: cable length 301.5 ft; breaking strength 14,000 lb (illustrative)
Answers
- Horizontal tension 1,862 lb; tension 1,885 lb at the upper end (9.15° below the horizontal) and 1,862 lb at the lower end (1.57°)
- Sag at midspan 11.09 ft below the chord; the lowest point of the cable is 197.9 ft from the upper end, 21.4 ft below it, past the rider
- Largest tension is 5.38 times the 350.75 lb carried; breaking strength over static tension = 7.43
Notes
Open this case in the tool: /analysis-tools/structures/statics/cable-sag-tension/?try=zip-line. The numbers are illustrative. The rider is held at midspan; a rolling trolley moves, brakes and bounces, and the straight-line distance between the ends is 300.67 ft, so 0.83 ft of extra cable decides the whole answer. Statics only: not a design check for a zip line.
More Examples for This Tool
- Golden Gate Bridge main cable: tension from the span, the sag and the deck weight (parabola)
- Power line conductor: catenary sag and tension of a 1,200-ft span (Bureau of Reclamation Example 4)
- Slackline with a walker at the middle: why a tight line pulls eight times the person's weight
- Hammock of known length: the catenary where the parabola is not good enough
- Clothesline between uneven posts with a heavy item off center, pulled to a known tension
- Weight hung from the middle of a light rope: the classic two-force triangle