Tools › Structures › Statics › Cable Sag and Tension › Example
Weight hung from the middle of a light rope: the classic two-force triangle
| Tool | Cable Sag and Tension |
| Source | original |
| Level | Undergraduate |
Problem
A 50 lb lamp hangs from the middle of a wire stretched across a 60-ft street. The wire's own weight is negligible and the lamp pulls the middle down 2 ft. Find the tension in the wire.
Inputs to Enter
- Span 60 ft, supports level, cable weight 0, deck load 0, point load 50 lb at 30 ft from the left
- Known: sag at midspan 2 ft
Answers
- Horizontal tension H = P L / (4 d) = 50 × 60 / 8 = 375 lb
- Tension in each half T = P / (2 sin θ) = 375.8 lb, with θ = 3.81° below the horizontal: 7.5 times the weight of the lamp
- Wire length 2 √(30² + 2²) = 60.13 ft
Notes
Enter the values listed (no Try this chip for this case). With no distributed load the cable is two straight lines and the hand solution by the triangle of forces is exact; the tool says so and prints no parabola comparison.
More Examples for This Tool
- Golden Gate Bridge main cable: tension from the span, the sag and the deck weight (parabola)
- Power line conductor: catenary sag and tension of a 1,200-ft span (Bureau of Reclamation Example 4)
- Slackline with a walker at the middle: why a tight line pulls eight times the person's weight
- Hammock of known length: the catenary where the parabola is not good enough
- Clothesline between uneven posts with a heavy item off center, pulled to a known tension
- Zip line on a sloping span with a rider at the middle, cable length known