Tools › Structures › Statics › Cable Sag and Tension › Example
Golden Gate Bridge main cable: tension from the span, the sag and the deck weight (parabola)
| Tool | Cable Sag and Tension |
| Source | Anagnos, T. (2007). "The Golden Gate Bridge." In Sheppard, S. D., and Tongue, B. H., Statics: Analysis and Design of Systems in Equilibrium, John Wiley and Sons, Hoboken, NJ, pp. 38–53. Table 3.2, p. 45 (main span 1280 m, maximum sag 144 m, deck 330 kN/m) and p. 46 (237 MN in the center link of a 160-m link model). The computation is original. |
| Level | Undergraduate |
Problem
The main span of the Golden Gate Bridge is 1280 m (4,200 ft) between towers and its two main cables sag 144 m (472 ft). Taking the deck as 330 kN/m shared equally by the two cables and leaving out the cables' own weight, as the cited chapter does, find the horizontal tension, the largest tension and the angle of one cable at the towers.
Inputs to Enter
- Span 4,200 ft (1280 m), supports level, cable weight 0, deck load 11,300 lb/ft (165 kN/m) per cable
- Known: sag at midspan 472 ft (144 m); no point load
Answers
- Horizontal tension H = q L² / (8 d) = 11,300 × 4,200² / (8 × 472) = 52,790 kip (SI entry: 165 × 1280² / (8 × 144) = 234.7 MN; the chapter's 160-m link model prints 237 MN)
- Vertical force at each tower 23,730 kip; tension at the towers T = √(H² + V²) = 57,880 kip, 57.9 million lb (SI: 257.3 MN), 1.22 times the 47,460 kip carried
- Cable leaves each tower 24.2° below the horizontal; cable length between the towers 4,337.44 ft
Notes
The tool opens on this case; press Submit, or open it in the tool: /analysis-tools/structures/statics/cable-sag-tension/?try=golden-gate. The span is the District's published figure; the sag and the deck weight are from the cited chapter. A deck load is uniform along the horizontal, so the parabola is the exact shape here. This is an illustration of the parabola, not the design load of the bridge: the cables' own weight, live load, the side spans and temperature are left out.
More Examples for This Tool
- Power line conductor: catenary sag and tension of a 1,200-ft span (Bureau of Reclamation Example 4)
- Slackline with a walker at the middle: why a tight line pulls eight times the person's weight
- Hammock of known length: the catenary where the parabola is not good enough
- Clothesline between uneven posts with a heavy item off center, pulled to a known tension
- Zip line on a sloping span with a rider at the middle, cable length known
- Weight hung from the middle of a light rope: the classic two-force triangle