Tools › Structures › Statics › Cable Sag and Tension › Example
Slackline with a walker at the middle: why a tight line pulls eight times the person's weight
| Tool | Cable Sag and Tension |
| Source | original |
| Level | Undergraduate |
Problem
A 180 lb person stands at the middle of a 100-ft slackline that weighs 0.05 lb/ft. With the person on it the line sags 3 ft. Find the tension in the line and its ratio to a breaking strength of 6,000 lb.
Inputs to Enter
- Span 100 ft, anchors level, line weight 0.05 lb/ft, point load 180 lb at 50 ft from the left anchor
- Known: sag at midspan 3 ft; breaking strength 6,000 lb (illustrative)
Answers
- Beam analogy: M = w L² / 8 + P L / 4 = 62.5 + 4,500 = 4,562.5 lb-ft, so H ≈ M / d = 1,521 lb; exact H = 1,521 lb
- Each anchor: vertical force 92.5 lb, tension 1,524 lb, 8.24 times the 185 lb carried; the line leaves each anchor only 3.48° below the horizontal
- Line length 100.18 ft: 2 in of slack make the 3 ft of sag
- Breaking strength over static tension = 3.94
Notes
Open this case in the tool: /analysis-tools/structures/statics/cable-sag-tension/?try=slackline. The numbers are illustrative. This is the static tension only: a bounce or a fall multiplies it, webbing stretches, and the tool is not a design check for a line that carries a person.
More Examples for This Tool
- Golden Gate Bridge main cable: tension from the span, the sag and the deck weight (parabola)
- Power line conductor: catenary sag and tension of a 1,200-ft span (Bureau of Reclamation Example 4)
- Hammock of known length: the catenary where the parabola is not good enough
- Clothesline between uneven posts with a heavy item off center, pulled to a known tension
- Zip line on a sloping span with a rider at the middle, cable length known
- Weight hung from the middle of a light rope: the classic two-force triangle