Tools › Structures › Beams › Torsion of Bars and Shafts › Example
Solid shaft sized from power and speed: torque, shear stress, twist and required diameter
| Tool | Torsion of Bars and Shafts |
| Source | Original case (illustrative numbers); closed forms of mechanics of materials, checked in test-scripts/test_torsion_of_bars.php. |
| Level | Undergraduate |
Problem
A solid steel shaft 1.5 in in diameter and 36 in long (G = 11.5 Msi) transmits 150 hp at 1,750 rpm. Find the torque, the largest shear stress and the angle of twist, compare them with an allowable stress of 12 ksi and an allowable twist of 1.5°, and find the diameter that would meet both.
Inputs to Enter
- Analyze: round shaft; torque from power and speed: 150 hp, 1,750 rpm
- Outside diameter 1.5 in, inside diameter 0, length 36 in, shear modulus 11.5 Msi
- Allowable stress 12 ksi, allowable twist 1.5 deg; Advanced mode for the required diameter
Answers
- T = P / ω = 82,500 ft-lb/s / 183.3 rad/s = 450.2 lb-ft = 5,402 lb-in (63,025 × 150 / 1,750)
- J = π d⁴ / 32 = 0.4970 in⁴; largest shear stress T d / (2 J) = 8.152 ksi at the surface
- Twist T L / (G J) = 0.03403 rad = 1.950°; stiffness 158,800 lb-in per radian
- Allowable / actual: stress 1.47, twist 0.769 (the twist limit is not met)
- Required diameter: 1.319 in for stress, 1.602 in for twist; twist governs
Notes
Open this case in the tool: /analysis-tools/structures/beams/torsion-of-bars/?try=drive-shaft (choose Advanced for the required diameter). The same case in SI on the chip: 110 kW at 1,750 rpm on a 40 mm shaft 900 mm long gives 600.2 N-m, 47.77 MPa and 1.539°. Keyways, shoulders, bending and fatigue are not included; see Shaft Design.
More Examples for This Tool
- Thin-walled rectangular tube in torsion, closed and slit (NASA Astronautic Structures Manual example)
- Hollow shaft against the solid shaft of the same weight: stress and stiffness
- Stepped shaft fixed at both ends with a torque at the step: reactions by compatibility
- Rectangular bar in torsion: Saint-Venant coefficients, largest stress at the middle of the long side